Bently Nevada 21000-16-10-00-102-03-02 Proximity Probe Housing Assembly

21000-16-10-00-102-03-02: Proximity Probe Housing Assembly

The 21000-16-10-00-102-03-02 is the Proximity Probe Housing Assembly covered on this page. The attribute that decides whether it fits the existing installation without modification is 1.1 kg (2.4 lb) typical, without fittings.

This configuration's proximity probe housing assembly is the attribute that drives the replacement decision. In a machine protection or condition-monitoring installation proximity probe housing assembly is the attribute that decides whether the sensor reaches the target and reads it on the correct gap. A probe or transducer specified to the wrong case length, thread or sensitivity either cannot reach the measured surface or returns vibration values that do not line up with the rest of the train. Confirming 1.1 kg (2.4 lb) typical, without fittings against the existing mount is therefore the first check before a replacement, not an afterthought.

Configuration From the Published Data

This unit is documented as a Proximity Probe Housing Assembly. The configuration carried in the order code is: Material: Aluminum body with 304 stainless steel sleeve; Fittings: One 3/4-14 NPT plug, one 3/4-14 to 1/2-14 NPT reducer, cable seal grip with grommets; Mounting Thread: 02 3/4-14 NPT. These are the figures to confirm against the existing mount and monitor before ordering a replacement.

Related Configurations

Other published configurations in the same family — confirm the distinguishing specification against your installation:

Sensing