Bently Nevada 24701-28-05-00-140-00-02 Proximity Probe Housing Assembly

Technical Specifications Breakdown

Key parameters for the 24701-28-05-00-140-00-02 are listed below for quick reference:

Industry Applications and Failure Prevention

By maintaining a sealed environment around the probe tip, it prevents contamination from moisture, dust, and debris—common failure points in vibration monitoring systems. The 303 stainless steel body and 304 stainless steel sleeve offer corrosion resistance in chemical and offshore environments.

Installation and Setup Guidance

When installing the 24701-28-05-00-140-00-02, ensure the mounting thread (3/4-14 NPT) is properly sealed with appropriate thread sealant to prevent leakage. The probe sleeve length of 14 inches (probe penetration) must be matched to the machine casing thickness. The dome cover screws into the housing body; verify O-ring condition before final tightening. Conduit connections should be made to the threaded ports using approved fittings (not included).

Maintenance and Reliability

Periodic inspection of the housing assembly is recommended to check for O-ring degradation, corrosion, or physical damage. The stainless steel construction provides long service life, but environmental factors such as high humidity or chemical exposure may accelerate wear. Replace O-rings if any signs of cracking or compression set are observed.

Robust Protection for Critical Vibration Monitoring

In industrial rotating machinery, reliable vibration measurement is essential for predictive maintenance and asset protection. The Bently Nevada 24701-28-05-00-140-00-02 proximity probe housing assembly provides a rugged, sealed enclosure for the 3300 XL 8mm proximity probe, ensuring accurate and uninterrupted data collection in harsh environments.

Compatibility and Integration

This housing assembly is designed for use with Bently Nevada 3300 XL 8mm proximity probes. The 0.5 m probe cable length is suitable for close-coupled installations.

Selection Guide and Purchasing Advice

For reliable vibration monitoring, choose the Bently Nevada 24701-28-05-00-140-00-02 when you need a 14-inch probe penetration with 3/4-14 NPT mounting. AutoDCSTech offers this assembly as new original in factory packing with a 12-month warranty. Please verify current lifecycle status and availability with AutoDCSTech before ordering.