Technical Specifications Breakdown
Key parameters for the 330101-00-10-10-02-05 are listed below for quick reference:
| Feature | Specification |
|---|---|
| Product Type | 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor |
| Unthreaded Length Option | 00 = 0.0 in |
| Overall Case Length Option | 10 = 1.0 in |
| Total Length Option | 10 = 1.0 meter (3.3 feet) |
| Connector and Cable-Type Option | 02 = Miniature coaxial ClickLoc connector, standard cable |
| Agency Approval Option | 05 = CSA, ATEX, IECEx Approvals |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Linear Range | 2 mm (80 mils) from 0.25 to 2.3 mm (10 to 90 mils) |
| Incremental Scale Factor (ISF) - Standard 5 or 1 meter System | 7.87 V/mm (200 mV/mil) ± 5% |
| Probe Temperature Range - Standard | -52°C to +177°C (-62°F to +350°F) |
Industry Applications
In steam turbines, the 2 mm linear range captures shaft displacement accurately. For centrifugal compressors, the 7.87 V/mm scale factor provides fine resolution for early fault detection. The CSA, ATEX, and IECEx approvals allow deployment in hazardous areas without additional certification.
Installation & Setup Guidance
Mount the probe using the 3/8-24 UNF thread with a recommended torque of 11.2 N•m (100 in•lbf) for standard forward mounting. For the first three threads, use 7.5 N•m (66 in•lbf). The recommended gap setting for radial vibration is -9 Vdc, approximately 1.27 mm (50 mils). Use 3-conductor shielded triad cable for field wiring, with a maximum length of 305 meters (1,000 feet) to the monitor.
Maintenance & Reliability
The patented TipLoc and CableLoc designs provide 330 N (75 lbf) pull strength, reducing cable fatigue. The Viton O-ring seals differential pressure. Inspect the probe tip and cable periodically for physical damage. The probe operates reliably from -52°C to +177°C, with less than 3% ASF change in 93% humidity over 56 days.
Robust Vibration Monitoring with the 3300 XL 8 mm Probe
Industrial rotating machinery demands precise, reliable vibration measurement to prevent catastrophic failures. The Bently Nevada 330101-00-10-10-02-05 is a 3300 XL 8 mm probe designed for eddy-current displacement sensing in harsh environments.
Selection Guide & Purchasing Advice
When ordering the 330101-00-10-10-02-05, verify the total length (1.0 meter) and connector type (miniature coaxial ClickLoc) match your system requirements. Contact AutoDCSTech for current lifecycle status and availability before placing an order.
Troubleshooting & Common Issues
If the output signal is erratic, check the probe tip for debris or damage. Verify the gap setting is within the linear range (0.25 to 2.3 mm). Ensure field wiring does not exceed 305 meters to avoid signal roll-off at high frequencies. For pressure seal concerns, contact the custom design department.
Availability & Condition at AutoDCSTech
| Part Number | 330101-00-10-10-02-05 |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
