330101-00-12-10-01-CN: 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor
The 330101-00-12-10-01-CN is the 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor covered on this page. The attribute that decides whether it fits the existing installation without modification is 12 - 1.2 in.
This configuration's 3300 xl 8 mm probe, 3/8-24 unf thread, without armor is the attribute that drives the replacement decision. In a machine protection or condition-monitoring installation 3300 xl 8 mm probe, 3/8-24 unf thread, without armor is the attribute that decides whether the sensor reaches the target and reads it on the correct gap. A probe or transducer specified to the wrong case length, thread or sensitivity either cannot reach the measured surface or returns vibration values that do not line up with the rest of the train. Confirming 12 - 1.2 in against the existing mount is therefore the first check before a replacement, not an afterthought.
Configuration From the Published Data
This unit is documented as a 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor. The configuration carried in the order code is: Product Type: 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor; Product No.: 330101-00-12-10-01-CN; Unthreaded Length: 0.0 in; Overall Case Length: 12 - 1.2 in; Total Length: 10 - 1.0 metre (3.3 feet); Connector: Miniature coaxial ClickLoc with connector protector, standard cable; Linear Range: 2 mm (80 mils). These are the figures to confirm against the existing mount and monitor before ordering a replacement.
| Feature | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Brand | Bently Nevada |
| Part Number | 330101-00-12-10-01-CN |
| Product No. | 330101-00-12-10-01-CN |
| Product Type | 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor |
| Unthreaded Length | 0.0 in |
| Overall Case Length | 12 - 1.2 in |
| Total Length | 10 - 1.0 metre (3.3 feet) |
| Connector | Miniature coaxial ClickLoc with connector protector, standard cable |
| Agency Approval | CN Country Specific Approval |
| Linear Range | 2 mm (80 mils) |
| Incremental Scale Factor | 7.87 V/mm (200 mV/mil) ± 5% (5 or 1 meter system) |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel |
| Probe Temperature Range (Standard) | -52°C to +177°C (-62°F to +350°F) |
| Recommended Gap Setting | -9 Vdc (approx. 1.27 mm) |
| Cable Pull Strength | 330 N (75 lbf) |
| Humidity | <3% change in ASF at 93% humidity per IEC 68-2-3. |
Related Configurations
Other published configurations in the same family — confirm the distinguishing specification against your installation:
| Related Part Number | Configuration Difference |
|---|---|
| bently-nevada-330101-00-12-10-01-00-3300-xl-8-mm-probe-3-8-24-unf-thread | confirm the configuration against your installation |
| bently-nevada-330101-00-12-10-01-05-3300-xl-8-mm-probe | confirm the configuration against your installation |
Availability & Condition at AutoDCSTech
| Part Number | 330101-00-12-10-01-CN |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
