Technical Specifications Breakdown
Key parameters for the 330101-00-14-10-02-CN are listed below for quick reference:
| Feature | Specification |
|---|---|
| Product Type | 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor |
| Unthreaded Length Option | 00 - 0.0 in |
| Overall Case Length Option | 14 - 1.4 in |
| Total Length Option | 10 - 1.0 metre (3.3 feet) |
| Connector and Cable-Type Option | 02 Miniature coaxial ClickLoc connector, standard cable |
| Agency Approval Option | CN - Approvals country specific |
| Linear Range | 2 mm (80 mils). Linear range begins at approximately 0.25 mm (10 mils) from target and is from 0.25 to 2.3 mm (10 to 90 mils) (approximately –1 to –17 Vdc). |
| Recommended Gap Setting for Radial Vibration | -9 Vdc [approximately 1.27 mm (50 mils)] |
| Incremental Scale Factor (ISF) - Standard 5 or 1 meter System | 7.87 V/mm (200 mV/mil) ± 5% including interchangeability error when measured in increments of 0.25 mm (10 mils) over the 80 mil linear range from 0°C to +45°C (+32°F to +113°F). |
| Probe Temperature Range - Standard Probe | -52°C to +177°C (-62°F to +350°F) |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
Industry Applications
The patented TipLoc molding method provides a robust bond between the probe tip and body, ensuring consistent performance in high-vibration environments. The 1.0 metre cable length with miniature coaxial ClickLoc connector simplifies installation in confined spaces. By using this probe, you reduce the risk of false trips and extend machinery uptime.
Installation & Setup Guidance
Mount the probe using the 3/8-24 UNF thread into a properly tapped hole. Ensure the target surface is clean and within the linear range (0.25 to 2.3 mm from target). Set the initial gap to approximately -9 Vdc (1.27 mm) for radial vibration measurements. Use 3 conductor shielded triad cable for field wiring, with a maximum length of 305 meters between the Proximitor Sensor and the monitor. Verify the Incremental Scale Factor (ISF) of 7.87 V/mm at installation to confirm system accuracy.
Maintenance & Reliability
The probe case is made of AISI 303 or 304 stainless steel, offering corrosion resistance. The probe tip is molded PPS plastic, providing a thicker encapsulation for enhanced durability. Inspect the probe and cable periodically for physical damage. Avoid exposing the probe to temperatures below -34°C (-30°F) to prevent premature failure of the pressure seal. The optional FluidLoc cable prevents oil leakage through the cable interior.
Compatibility & Integration
This probe is designed for use with Bently Nevada 3300 XL Proximitor Sensors and extension cables. The miniature coaxial ClickLoc connector ensures a secure, quick connection. The standard cable length of 1.0 metre (3.3 feet) allows flexible routing. For extended temperature applications, use the Extended Temperature Range probe option (not included in this model).
Selection Guide & Purchasing Advice
When selecting a probe, consider the required cable length, thread size, and environmental conditions. For higher temperatures, choose the Extended Temperature Range variant. AutoDCSTech stocks this probe and can advise on compatibility with your existing monitoring system. Please verify current lifecycle status and availability with AutoDCSTech before ordering.
Troubleshooting & Common Issues
If readings are erratic, check the probe gap and target surface condition. Ensure the cable is not damaged and the ClickLoc connector is fully seated. Verify the field wiring is within the maximum length of 305 meters. If the scale factor deviates beyond ±5%, recalibrate the system. For pressure seal concerns, contact AutoDCSTech for custom testing options.
Availability & Condition at AutoDCSTech
| Part Number | 330101-00-14-10-02-CN |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
