Bently Nevada 330101-00-15-05-01-00 3300 XL 8 mm Probe

Technical Specifications Breakdown

Key parameters for the 330101-00-15-05-01-00 are listed below for quick reference:

Industry Applications for Reliable Data

The 8 mm diameter provides enhanced ruggedness compared to smaller probes, reducing the risk of damage during installation or operation. The patented TipLoc and CableLoc designs ensure a robust bond and high pull strength (330 N / 75 lbf), critical for long-term reliability in demanding environments.

Installation and Setup Guidance

When installing the 330101-00-15-05-01-00, ensure the target surface is clean and within the specified linear range. The recommended gap setting for radial vibration is -9 Vdc (approximately 1.27 mm / 50 mils). Use the provided miniature coaxial ClickLoc connector for secure attachment. Field wiring should use 3-conductor shielded triad cable (0.2 to 1.5 mm² / 16 to 24 AWG) with a maximum length of 305 meters (1,000 feet) to the monitor.

Maintenance and Reliability

Regularly inspect the probe and cable for physical damage or wear. The probe is designed to seal differential pressure between tip and case using a Viton O-ring. Avoid exposing the probe to temperatures below -34°C (-30°F) to prevent premature pressure seal failure. The probe case material (AISI 303 or 304 stainless steel) offers corrosion resistance in most industrial environments.

Robust Vibration Monitoring for Critical Machinery

As a maintenance engineer, you understand the high cost of unplanned downtime. The Bently Nevada 330101-00-15-05-01-00 3300 XL 8 mm Probe offers the reliability needed for continuous vibration monitoring of rotating equipment. This probe is engineered to withstand harsh conditions while delivering accurate data.

Compatibility and Integration

This probe is part of the Bently Nevada 3300 XL system, designed for seamless integration with 3300 XL Proximitor sensors and extension cables. The standard system length (0.5 meter) provides an Incremental Scale Factor of 7.87 V/mm ± 5% over the 80 mil linear range from 0°C to +45°C (+32°F to +113°F).

Selection Guide and Purchasing Advice

When selecting a replacement or new probe, verify the thread size (3/8-24 UNF) and total length (0.5 meter) match your application. The 330101-00-15-05-01-00 is a standard temperature range probe without armor. For extended temperature ranges or armored versions, contact AutoDCSTech for options. Please verify current lifecycle status and availability with AutoDCSTech before ordering.