Bently Nevada 330101-00-32-05-02-00 3300 XL 8 mm Probe, 3/8-24 UNF Thread

Technical Specifications Breakdown

Key parameters for the 330101-00-32-05-02-00 are listed below for quick reference:

Industry Applications: Protecting Critical Rotating Assets

Its 2 mm linear range and 7.87 V/mm scale factor deliver precise shaft relative vibration measurements, enabling early detection of imbalance, misalignment, or bearing wear. The robust PPS tip and stainless steel case withstand oil, moisture, and temperature extremes common in power generation and oil & gas facilities.

Installation & Setup Guidance

Mount the probe using the 3/8-24 UNF thread into a suitable mounting bracket or machine case. Ensure the target surface is clean and within the recommended gap of -9 Vdc (approximately 1.27 mm). Use the miniature coaxial ClickLoc connector to attach the extension cable securely. For field wiring, employ 3-conductor shielded triad cable (0.2 to 1.5 mm² / 16 to 24 AWG) and keep the total distance between the Proximitor and monitor under 305 meters (1,000 feet) to avoid signal rolloff.

Maintenance & Reliability

The patented TipLoc and CableLoc designs provide a robust bond and 330 N (75 lbf) pull strength, reducing the risk of cable damage during service. Inspect the probe tip and cable periodically for wear or contamination. The Viton® O-ring seals differential pressure; avoid exposing the probe to temperatures below -34°C (-30°F) to prevent pressure seal failure. For high-humidity environments, the probe exhibits less than 3% change in Average Scale Factor after 56 days at 93% humidity per IEC 68-2-3.

Robust Vibration Sensing for Critical Machinery

For maintenance engineers tasked with protecting rotating assets, the Bently Nevada 330101-00-32-05-02-00 3300 XL 8 mm Probe offers a field-proven solution. This non-contact eddy current probe is designed for continuous vibration and position monitoring in harsh industrial environments. Its 3/8-24 UNF thread and 0.5 meter cable with miniature coaxial ClickLoc connector simplify installation while ensuring signal integrity.

Compatibility & Integration

This probe is part of the 3300 XL system and works with compatible Bently Nevada Proximitor sensors and monitoring platforms. The 0.5 meter cable with miniature coaxial ClickLoc connector mates directly with standard 3300 XL extension cables. For extended temperature range applications, the probe tip can operate up to +218°C (+425°F) with the appropriate ETR option.

Selection Guide & Purchasing Advice

When selecting a replacement probe, verify the thread size (3/8-24 UNF), cable length (0.5 m), and connector type (miniature coaxial ClickLoc). The 330101-00-32-05-02-00 is a standard configuration without armor, suitable for most internal machine installations. Contact AutoDCSTech for availability and lifecycle status before ordering to ensure compatibility with your existing system.