Technical Specifications Breakdown
Key parameters for the 330103-00-12-15-01-05 are listed below for quick reference:
| Feature | Specification |
|---|---|
| Probe Type | 3300 XL 8 mm Proximity Probe, Metric |
| Thread Size | M10 x 1 |
| Unthreaded Length | 0 mm |
| Overall Case Length | 120 mm |
| Total Length | 1.5 meters (4.9 feet) |
| Connector | Miniature coaxial ClickLoc with connector protector |
| Cable Type | Standard cable |
| Agency Approvals | CSA, ATEX, IECEx |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Linear Range | 2 mm (80 mils), from 0.25 to 2.3 mm (10 to 90 mils) |
| Recommended Gap Setting (Radial Vibration) | -9 Vdc [approximately 1.27 mm (50 mils)] |
| Probe DC Resistance (1.5m) | 7.73 ± 0.50 Ω |
| Operating Temperature (Standard) | -52°C to +177°C (-62°F to +350°F) |
| Weight | 323 g/m (11.4 oz) |
Application in Rotating Machinery Protection
This probe is designed for non-contact vibration and position measurement on critical assets like steam turbines, compressors, and pumps. The 2 mm linear range provides accurate data for radial vibration monitoring, while the PPS tip withstands high temperatures up to +177°C. The M10x1 metric thread simplifies installation in standard mounting holes.
Installation Guidance for Maintenance Teams
When installing, ensure the probe gap is set to the recommended -9 Vdc (approximately 1.27 mm or 50 mils) for radial vibration applications. Use 3-conductor shielded triad cable with tinned field wiring, and keep field wiring lengths under 305 meters (1,000 feet) to avoid signal roll-off. The probe case thread engagement should not exceed 15 mm.
Maintenance and Reliability Considerations
Inspect the probe and cable periodically for physical damage or wear. Avoid exposing the probe to temperatures below -34°C (-30°F) to prevent premature pressure seal failure. The probe is designed to seal differential pressure between tip and case using a Viton O-ring; contact the custom design department if pressure testing is required.
Reliable Vibration Monitoring with the Bently Nevada 3300 XL Probe
This 3300 XL 8 mm proximity probe delivers precise shaft displacement measurements, helping prevent costly unplanned downtime. Its robust design and agency approvals make it a reliable choice for harsh industrial environments.
Compatibility and Integration
This probe works with Bently Nevada 3300 XL Proximitor sensors and monitoring systems. It is approved for use in hazardous areas when installed with intrinsic safety barriers per drawing 141092 or non-incendive circuits per drawing 140979. Refer to the temperature schedule for specific ambient limits based on temperature classification.
Selection Guidance
When selecting a replacement, verify the part number 330103-00-12-15-01-05 matches your system requirements. AutoDCSTech stocks genuine Bently Nevada probes to ensure reliable operation. Please verify current lifecycle status and availability with AutoDCSTech before ordering.
Availability & Condition at AutoDCSTech
| Part Number | 330103-00-12-15-01-05 |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
