Bently Nevada 330103-00-13-05-02-05 3300 XL 8 mm Proximity Probe

Technical Specifications Breakdown

Key parameters for the 330103-00-13-05-02-05 are listed below for quick reference:

Industry Applications and Cost Impact

The 2 mm linear range and -9 Vdc recommended gap setting ensure consistent sensitivity for radial vibration measurements. By catching issues early, facilities can avoid catastrophic failures that lead to production losses and expensive emergency repairs. The stainless steel case and PPS tip provide corrosion resistance, extending service life and reducing replacement frequency.

Installation and Setup Guidance

Proper installation is key to accurate readings. Use the M10 x 1 threaded case with a maximum thread engagement of 15 mm. Field wiring should be 0.2 to 1.5 mm² (16 to 24 AWG) with a 3-conductor shielded triad cable. Maximum cable length between the probe and the 3300 XL Proximitor Sensor is 305 meters (1,000 feet). Ensure the probe tip is clean and the target surface is smooth. The miniature coaxial ClickLoc connector simplifies field connections, reducing installation time and labor costs.

Maintenance and Reliability

The 330103-00-13-05-02-05 is designed for long-term reliability in harsh conditions. The probe operates from -52°C to +177°C and withstands 93% humidity with less than 3% change in Average Scale Factor (ASF). The Viton® O-ring seals differential pressure between the tip and case. Note that exposing the probe to temperatures below -34°C (-30°F) may cause premature failure of the pressure seal. Regular visual inspections and periodic calibration checks help maintain measurement accuracy and extend equipment life.

Optimize Vibration Monitoring with the Bently Nevada 330103-00-13-05-02-05

For critical rotating machinery, reliable vibration data is essential to prevent unplanned downtime and costly repairs. The Bently Nevada 330103-00-13-05-02-05 3300 XL 8 mm Proximity Probe delivers the precision and durability needed for continuous monitoring in demanding industrial environments. By providing accurate shaft displacement measurements, this probe helps you detect early signs of bearing wear, imbalance, or misalignment, enabling proactive maintenance that reduces operational costs.

Compatibility and Integration

This probe is part of the 3300 XL series and works with Bently Nevada 3300 XL Proximitor Sensors and monitoring systems. The 0.5-meter cable length and standard miniature coaxial ClickLoc connector ensure straightforward integration into existing setups. The probe is approved for hazardous area installations: Class I, Zone 0 (AEx/Ex ia IIC T5...T1 Ga) when installed with intrinsic safety barriers, and Class I, Zone 2 (AEx/Ex nA IIC T5…T1 Gc) with non-incendive circuits.

Selection Guide and Purchasing Advice

When selecting a proximity probe, consider the specific thread size, cable length, and approvals required for your application. The 330103-00-13-05-02-05 offers a 0.5-meter cable and M10 x 1 thread, suitable for many standard installations. For longer cable lengths or different thread options, consult the full 3300 XL probe family. AutoDCSTech stocks this model and can assist with availability and lifecycle status. Please verify current lifecycle status and availability with AutoDCSTech before ordering.