Bently Nevada 330103-00-13-10-12-00 3300 XL 8 mm Proximity Probe

Technical Specifications Breakdown

Key parameters for the 330103-00-13-10-12-00 are listed below for quick reference:

Industry Applications

In steam turbines, it detects radial vibration and thrust position changes that indicate bearing wear or imbalance. For centrifugal compressors, the 330103-00-13-10-12-00 provides early warning of rotor instability, allowing operators to schedule maintenance before catastrophic failure. Its robust design also suits large electric motors and pumps in oil and gas, power generation, and petrochemical facilities.

Installation & Setup Guidance

Mount the probe using the M10 x 1 thread, ensuring maximum thread engagement of 15 mm. Use a 3-conductor shielded triad cable with tinned field wiring (16 to 24 AWG). The maximum field wiring length between the probe and monitor is 305 meters (1,000 feet). For radial vibration applications, set the gap to approximately -9 Vdc (1.27 mm or 50 mils). Verify the target surface is clean and free of runout to ensure accurate readings.

Maintenance & Reliability

The probe operates reliably across a standard temperature range of -52°C to +177°C (-62°F to +350°F). Exposing the probe to temperatures below -34°C (-30°F) may cause premature failure of the pressure seal. The PPS tip and stainless steel case resist harsh environments. Inspect the cable and connector periodically for damage, especially in high-vibration areas. The probe is designed to seal differential pressure between tip and case using a Viton O-ring.

Compatibility & Integration

This probe integrates with Bently Nevada 3300 XL Proximitor sensors and compatible monitoring systems. The miniature coaxial ClickLoc connector ensures a secure, quick connection. For intrinsically safe installations, use zener barriers per drawing 141092 or galvanic isolators. For non-incendive circuits, follow drawing 140979. Check local regulations for hazardous area compliance.

Selection Guide & Purchasing Advice

When selecting a replacement or new probe, verify the total length, thread type, and connector style match your system. The 330103-00-13-10-12-00 is a standard configuration with 1.0 meter cable and ClickLoc connector. For custom pressure testing or extended temperature ranges, contact the manufacturer. AutoDCSTech offers this genuine Bently Nevada probe with fast shipping and expert support. Please verify current lifecycle status and availability with AutoDCSTech before ordering.