Technical Specifications Breakdown
Key parameters for the 330103-00-16-10-01-00 are listed below for quick reference:
| Feature | Specification |
|---|---|
| Product Type | 3300 XL 8 mm Proximity Probe |
| Unthreaded Length Option | 0 mm |
| Overall Case Length Option | 160 mm |
| Total Length Option | 1.0 meter (3.3 feet) |
| Connector and Cable-Type Option | Miniature coaxial ClickLoc connector with connector protector, standard cable |
| Agency Approval Option | Not required |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Probe Case Thread | M10 x 1 |
| Maximum Length of Thread Engagement | 15 mm |
| Linear Range | 2 mm (80 mils), from approximately 0.25 mm (10 mils) to 2.3 mm (90 mils) |
| Recommended Gap Setting for Radial Vibration | -9 Vdc [approximately 1.27 mm (50 mils)] |
| Nominal Probe DC Resistance (1.0 m length) | 7.59 ± 0.50 Ω |
| Operating and Storage Temperature (Standard Probe) | -52°C to +177°C (-62°F to +350°F) |
| Probe Weight | 323 g/m (11.4 oz) |
Industry Applications for the 3300 XL Probe
Typical applications include:
- Steam and Gas Turbines: Monitoring radial vibration and thrust position to prevent catastrophic blade rubs.
- Centrifugal Compressors: Detecting shaft instability and misalignment early.
- Pumps and Motors: Providing continuous vibration data for predictive maintenance programs.
Installation & Setup Guidance
Proper installation is key to accurate readings. The 330103-00-16-10-01-00 uses an M10 x 1 thread with a maximum engagement of 15 mm. Ensure the probe tip is clean and the target surface is smooth. For radial vibration, set the initial gap to approximately -9 Vdc (1.27 mm). Use 3-conductor shielded triad cable with tinned wiring; field wiring should be 0.2 to 1.5 mm² (16 to 24 AWG). The maximum cable length between probe and monitor is 305 meters (1,000 feet).
Maintenance & Reliability
From a service standpoint, this probe offers long-term stability. The PPS tip resists chemicals and wear, while the stainless steel case withstands corrosive environments. Regularly inspect the cable and connector for damage. The probe is designed to seal differential pressure, but avoid exposing it to temperatures below -34°C (-30°F) to prevent pressure seal failure. Humidity testing shows less than 3% change in Average Scale Factor after 56 days at 93% humidity per IEC 68-2-3.
Reliable Vibration Monitoring with the Bently Nevada 330103-00-16-10-01-00
From a maintenance engineer's perspective, the Bently Nevada 330103-00-16-10-01-00 3300 XL 8 mm Proximity Probe is a cornerstone of reliable machinery protection. This probe is designed for non-contact vibration and position measurement, critical for early fault detection in rotating equipment like turbines, compressors, and pumps. Its robust construction and precise electrical characteristics ensure consistent performance, reducing unplanned downtime.
Compatibility & Integration
For hazardous locations, it can be used with intrinsically safe zener barriers per drawing 141092 or galvanic isolators, achieving Class I, Zone 0 ratings. Non-incendive installations per drawing 140979 are also supported.
Selection Guide & Purchasing Advice
When selecting a replacement or new probe, verify the total length and connector type. The 330103-00-16-10-01-00 features a 1.0 m cable with a miniature coaxial ClickLoc connector. For applications requiring agency approvals, consider alternate options. Please verify current lifecycle status and availability with AutoDCSTech before ordering.
Availability & Condition at AutoDCSTech
| Part Number | 330103-00-16-10-01-00 |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
