CC-PSV201: Servo Valve Positioner Module for Turbomachinery Control
The CC-PSV201 is the Servo Valve Positioner Module for Turbomachinery Control covered on this page. The attribute that decides whether it fits the existing installation without modification is 2 channels.
This configuration's servo valve positioner module for turbomachinery control is the attribute that drives the replacement decision. An electro-pneumatic positioner sits between the control signal and the valve actuator, and its configuration is about signal range, supply pressure and feedback. servo valve positioner module for turbomachinery control sets how the positioner maps the 4–20 mA command to valve travel and what diagnostics it returns. Verifying 2 channels against the actuator and the control loop prevents a positioner that mounts but cannot hold the valve position.
| Feature | Specification |
|---|---|
| Manufacturer | Honeywell |
| Brand | Honeywell |
| Part Number | CC-PSV201 |
| Output Type | Bipolar current (Ranges: 10, 20, 40, 80, 160, 320 mA) |
| Unipolar current (Ranges | 50, 300 mA) |
| Output Channels | 2 |
| Dither | 0-10% of FS, 25-60 Hz |
| Output Temperature Drift | 0.005% FS/°C |
| Output Current Linearity | ±0.05% FS |
| Resolution | ±0.05% FS |
| Maximum Open Circuit Voltage | 18 V |
| LVDT Interface | 3/4/5/6 wires, 8 V RMS max., 2.5-3.2 KHz |
| Excitation | 8 V RMS max, 2.5-3.2 KHz (max. internal excitation is 50 mA) |
| Frequency Stability | 2.5-3.2 KHz ±5 Hz |
| Channels | 2 |
| Galvanic Isolation | ±500 VDC |
| Isolation Technique | Isolation transformer |
| A/D Converter Resolution | 16-bits |
| Input/Output Range | 8 V RMS max., 2.5-3.2 KHz |
| Input Impedance | 4.6K |
| Input Scan Rate | 2.5 mS |
| Hardware Accuracy | ±0.075% FS (23.5°±2°C), ±0.15% FS (0-60°C) |
| Maximum Input Voltage | ±30 V |
| Scan Rate | 5 ms |
| Analog Outputs | 4-20 mA |
| Output Ripple | < 100 mV across 250 Ω load |
| Output Readback Accuracy | ±4% FS |
| Calibrated Accuracy | ±0.35% FS (25°C) incl. linearity |
| Directly Settable Output Current Range | 0 mA, 2.9 mA to 21.1 mA |
| Maximum Resistive Load | 760 ohms |
| Maximum Output Compliant Voltage | 16 V |
| Response Time | 1 mS |
| Digital Inputs | 2 channels |
| DI Power Voltage Range | 22 to 28 VDC |
| ON Sense Voltage/Current | 13 VDC (min.) or 6.12 mA (min.) |
| OFF Sense Voltage/Current | 5 VDC (max.) or 2.1 mA (max.) |
| Absolute Delay | 1.78 mS |
| Field Resistance for ON | 300 Ω max. @ 15 VDC |
| Field Resistance for OFF | 30 KΩ min. @ 30 VDC |
Related Configurations
Other published configurations in the same family — confirm the distinguishing specification against your installation:
| Related Part Number | Configuration Difference |
|---|---|
| honeywell-cc-psp401-speed-protection-module-for-turbomachinery-overspeed-pr | confirm the configuration against your installation |
Availability & Condition at AutoDCSTech
| Part Number | CC-PSV201 |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
