Bently Nevada 21505-00-12-10-02 Proximity Probe Vibration Transducer System

21505-00-12-10-02: Proximity Probe Vibration Transducer System

The 21505-00-12-10-02 is the Proximity Probe Vibration Transducer System covered on this page. The attribute that decides whether it fits the existing installation without modification is 120 mm.

The reason to specify this exact variant is proximity probe vibration transducer system. In a machine protection or condition-monitoring installation proximity probe vibration transducer system is the attribute that decides whether the sensor reaches the target and reads it on the correct gap. A probe or transducer specified to the wrong case length, thread or sensitivity either cannot reach the measured surface or returns vibration values that do not line up with the rest of the train. Confirming 120 mm against the existing mount is therefore the first check before a replacement, not an afterthought.

Configuration From the Published Data

This unit is documented as a Proximity Probe Vibration Transducer System. The configuration carried in the order code is: Diameter: 8 mm; Unthreaded Length: 0 mm; Overall Case Length: 120 mm; Total Length: 1.0 metre; Connector: Miniature male coaxial. These are the figures to confirm against the existing mount and monitor before ordering a replacement.

Related Configurations

Other published configurations in the same family — confirm the distinguishing specification against your installation:

Sensing