Bently Nevada 24701-28-10-00-110-00-02 Proximity Probe Housing Assembly

Technical Specifications Breakdown

Key parameters for the 24701-28-10-00-110-00-02 are listed below for quick reference:

Real-World Applications for Reliable Machinery Protection

The 11-inch probe penetration allows installation in machines with thick casings or insulation, while the 3/4-14 NPT mounting thread provides a secure, leak-proof connection. The 1-meter probe cable length suits standard junction box placements. By using this assembly, maintenance teams reduce false trips and extend machine uptime.

Installation and Setup Guidance

During installation, ensure the housing is properly aligned with the shaft target area. The dome cover screws into the body, and O-rings provide environmental sealing. Use the threaded ports for conduit connections. The reverse mount proximity probe is pre-installed inside the sleeve. Verify the gap between the probe tip and shaft per Bently Nevada guidelines (not provided here). Do not overtighten the NPT fitting to avoid thread damage.

Maintenance and Reliability Best Practices

Periodically inspect the housing for signs of corrosion or mechanical damage, especially in wet or corrosive atmospheres. Check O-ring integrity during each maintenance cycle. The stainless steel construction resists most industrial environments. Replace the assembly if the probe cable or connector shows wear. Always handle the probe with care to avoid bending the tip.

Robust Vibration Monitoring with Bently Nevada 24701-28-10-00-110-00-02

Industrial rotating machinery demands precise, reliable vibration monitoring to prevent catastrophic failures. The Bently Nevada 24701-28-10-00-110-00-02 proximity probe housing assembly provides a rugged, sealed enclosure for a 3300 XL 8mm reverse mount proximity probe, ensuring accurate shaft displacement measurements in harsh environments. This assembly integrates a 303 stainless steel body with a 304 stainless steel sleeve for corrosion resistance and durability.

Selection Guide and Purchasing Advice

When selecting a replacement, verify that the 24701-28-10-00-110-00-02 matches your required probe type (3300 XL 8mm), cable length (1 m), penetration (11 in), and mounting thread (3/4-14 NPT). AutoDCSTech stocks this assembly as new original in factory packing with a 12-month warranty. Please verify current lifecycle status and availability with AutoDCSTech before ordering.