Bently Nevada 31000-16-05-00-036-03-00 Proximity Probe Housing

Technical Specifications Breakdown

Key parameters for the 31000-16-05-00-036-03-00 are listed below for quick reference:

This housing is designed for environments where moisture, dust, and physical abuse are constant threats. In a steam turbine monitoring system, the Type 4X and IP66 ratings ensure the probe remains sealed against hose-directed water during washdowns. For reciprocating compressors in offshore platforms, the impact strength certified by BASEEFA (4 Joules at -39°C and 115°C) provides confidence against accidental blows. The 31000-16-05-00-036-03-00 is a cost-effective choice because it reduces unplanned downtime by protecting the sensor, eliminating the need for frequent replacements.

Installation & Setup Guidance

Mount the housing on a rigid, vibration-free surface using the provided 3/4-14 NPT fitting. Ensure the cable seal grip grommet matches the cable diameter (1/8 to 3/8 inches). Tighten the retaining nut to 29.4 N·m (260 in·lb) as recommended. Verify the O-ring is seated properly to maintain the IP66 seal. Do not apply internal or external pressure beyond ambient conditions, as the housing is not pressure-rated.

Maintenance & Reliability

Inspect the Neoprene O-ring and cable seal grommet annually for cracks or compression set. Clean the exterior with a mild detergent; avoid abrasive cleaners that could damage the PPS housing. The stainless steel sleeve and screws resist corrosion, but check for pitting in marine environments. The housing is designed for long service life, but periodic inspection ensures continued protection.

Robust Protection for Critical Vibration Monitoring

Industrial rotating machinery demands precise vibration monitoring to prevent catastrophic failures. The Bently Nevada 31000-16-05-00-036-03-00 proximity probe housing provides a durable, sealed enclosure for 3300 XL 8 mm probes, ensuring reliable operation in the toughest environments.

Compatibility & Integration

This housing is specifically designed for the 3300 XL 8 mm probe (option 16). It includes a 0.5 m (20 in) probe cable and a 3.6 in probe penetration. The fittings accommodate standard NPT connections, simplifying integration into existing Bently Nevada monitoring systems. No standoff adapter is included (option 00), and no outer sleeve or retaining nut is provided (option 00).

Selection Guide & Purchasing Advice

When selecting a proximity probe housing, consider the environmental protection required. The 31000-16-05-00-036-03-00 offers the highest ingress protection (IP66) and broad temperature range. For applications needing a standoff adapter or outer sleeve, contact AutoDCSTech for custom configurations. We stock this model and can advise on lifecycle status. Please verify current lifecycle status and availability with AutoDCSTech before ordering.