Bently Nevada 330101-00-14-10-02-05 3300 XL 8 mm Probe

Technical Specifications Breakdown

Key parameters for the 330101-00-14-10-02-05 are listed below for quick reference:

Industry Applications for Enhanced Reliability

The patented TipLoc and CableLoc designs ensure robust bonding and high pull strength (330 N or 75 lbf), reducing the risk of sensor failure in harsh environments.

Installation and Setup Guidance

When installing the 330101-00-14-10-02-05, ensure the target surface is clean and within the linear range (0.25 to 2.3 mm from target). The recommended gap setting for radial vibration is -9 Vdc (approximately 1.27 mm or 50 mils). Use field wiring of 0.2 to 1.5 mm² (16 to 24 AWG) with a 3-conductor shielded triad cable. Maximum field wiring length between the Proximitor sensor and monitor is 305 meters (1,000 feet). Always verify the probe's operating temperature range (-52°C to +177°C) matches the application environment.

Maintenance and Reliability

Periodically inspect the probe and cable for physical damage or wear. The probe is designed to seal differential pressure between tip and case using a Viton O-ring. Avoid exposing the probe to temperatures below -34°C (-30°F) to prevent premature pressure seal failure. For extended temperature range applications, contact the custom design department. The probe's robust construction minimizes maintenance intervals, but regular checks ensure long-term reliability.

Reliable Vibration Monitoring with the Bently Nevada 3300 XL Probe

Industrial rotating machinery demands precise and durable vibration monitoring to prevent costly downtime. The Bently Nevada 330101-00-14-10-02-05 is a 3300 XL 8 mm probe designed for eddy current displacement measurement. This probe features a 3/8-24 UNF thread and comes without armor, making it suitable for a wide range of applications where robust sensing is critical.

Selection Guide and Purchasing Advice

When selecting a replacement or new probe, verify the thread size (3/8-24 UNF), cable length (1.0 meter), and connector type (miniature coaxial ClickLoc). The 330101-00-14-10-02-05 is available with CSA, ATEX, and IECEx approvals for hazardous area use. For lifecycle status and availability, please verify with AutoDCSTech before ordering. AutoDCSTech offers genuine Bently Nevada parts with expert support to ensure your machinery monitoring system operates at peak performance.