Cost-Effective Vibration Monitoring with the Bently Nevada 330101-00-18-10-02-CN
Investing in reliable vibration monitoring is critical to avoid unplanned downtime and costly repairs. The Bently Nevada 330101-00-18-10-02-CN 3300 XL 8 mm probe offers a robust solution that balances performance with operational cost savings. This probe, featuring a 3/8-24 UNF thread and designed without armor, provides accurate displacement measurements essential for protecting rotating machinery.
Technical Specifications Breakdown
Key parameters for the 330101-00-18-10-02-CN are listed below for quick reference:
| Feature | Specification |
|---|---|
| Product Type | 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor |
| Unthreaded Length Option | Minimum unthreaded length: 0.0 in. |
| Overall Case Length Option | 18-1.8 in |
| Total Length Option | 10 - 1.0 metre (3.3 feet) |
| Connector and Cable-Type Option | 02 Miniature coaxial ClickLoc connector, standard cable |
| Agency Approval Option | CN Country Specific Approval |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Linear Range | 2 mm (80 mils). Linear range begins at approximately 0.25 mm (10 mils) from target and is from 0.25 to 2.3 mm (10 to 90 mils) (approximately –1 to –17 Vdc) |
| Incremental Scale Factor (ISF) Standard 5 or 1 meter System | 7.87 V/mm (200 mV/mil) ± 5% including interchangeability error when measured in increments of 0.25 mm (10 mils) over the 80 mil linear range from 0°C to +45°C (+32°F to +113°F) |
Industry Applications and Cost Impact
Its 2 mm linear range and high incremental scale factor (7.87 V/mm) enable precise detection of shaft displacement, allowing early intervention before minor issues escalate into major failures. By catching problems early, facilities can reduce maintenance costs and extend equipment life, directly improving operational ROI.
Installation and Setup Guidance
When installing the probe, ensure the recommended gap setting for radial vibration is -9 Vdc [approximately 1.27 mm (50 mils)]. Use field wiring of 0.2 to 1.5 mm² (16 to 24 AWG) with a 3 conductor shielded triad cable. The maximum length of 305 meters (1,000 feet) between the 3300 XL Proximitor Sensor and the monitor should be observed to maintain signal integrity. Proper installation minimizes commissioning time and reduces labor costs.
Maintenance and Reliability
The probe's PPS tip and stainless steel case provide durability in harsh environments. The patented TipLoc and CableLoc designs enhance pull strength (330 N / 75 lbf) and bond robustness, reducing the likelihood of premature failure. Operating temperature range for standard probes is -52°C to +177°C (-62°F to +350°F). Regular inspection of the connector and cable for wear can prevent unexpected downtime and replacement expenses.
Compatibility and Integration
This probe is designed for use with Bently Nevada 3300 XL extension cables and Proximitor sensors. The miniature coaxial ClickLoc connector simplifies field installation and ensures a secure connection, reducing installation errors and associated costs.
Selection Guide and Purchasing Advice
For optimal robustness against physical abuse, Bently Nevada recommends using 8 mm probes when possible. The 330101-00-18-10-02-CN is a cost-effective choice for standard applications without armor. Contact AutoDCSTech to verify current lifecycle status and availability before ordering. Our team can help you select the right configuration to match your budget and operational needs.
Availability & Condition at AutoDCSTech
| Part Number | 330101-00-18-10-02-CN |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
