Bently Nevada 330101-00-36-10-01-05 3300 XL 8 mm Probe, 3/8-24 UNF Thread, Without Armor

Technical Specifications Breakdown

Key parameters for the 330101-00-36-10-01-05 are listed below for quick reference:

Industry Applications

This 8 mm probe is engineered for radial vibration and axial position monitoring in steam turbines, compressors, pumps, and large electric motors. The 3/8-24 UNF thread allows direct mounting in standard Bently Nevada probe holders. The patented TipLoc and CableLoc designs provide enhanced mechanical integrity, reducing the risk of probe failure in high-vibration environments.

Installation & Setup Guidance

For optimal performance, mount the probe using a suitable Bently Nevada probe holder. Ensure the target surface is clean and has good electrical conductivity. The recommended gap setting for radial vibration is -9 Vdc, approximately 1.27 mm (50 mils). Use the supplied ClickLoc connector to attach the extension cable; the connector protector prevents damage during installation. Field wiring between the Proximitor and monitor should use 3-conductor shielded triad cable, 0.2 to 1.5 mm² (16 to 24 AWG), with a maximum length of 305 meters (1,000 feet).

Maintenance & Reliability

The probe tip is encapsulated in PPS plastic, providing chemical resistance and mechanical robustness. The stainless steel case (AISI 303 or 304) resists corrosion in typical industrial environments. Inspect the probe cable and connector periodically for signs of wear or damage. The probe is designed to seal differential pressure between the tip and case using a Viton O-ring; if your application involves pressure, contact our custom design department for pressure testing options.

Robust Vibration Monitoring for Critical Machinery

When protecting high-value rotating assets, the reliability of your proximity probe is non-negotiable. The Bently Nevada 330101-00-36-10-01-05 is a 3300 XL 8 mm probe designed for demanding industrial environments. This probe uses a 3/8-24 UNF thread and is supplied without armor, making it suitable for installations where a compact, robust sensor is required. It is built to deliver accurate, repeatable shaft displacement measurements.

Compatibility & Integration

This probe is part of the Bently Nevada 3300 XL system and is compatible with 3300 XL Proximitor sensors and extension cables. The standard 1.0 meter system provides an Incremental Scale Factor of 7.87 V/mm ± 5% over the linear range. The CSA, ATEX, and IECEx approvals make it suitable for use in hazardous locations. Please verify current lifecycle status and availability with AutoDCSTech before ordering.

Selection Guide & Purchasing Advice

When selecting a proximity probe, consider the thread size, cable length, and environmental approvals. The 330101-00-36-10-01-05 is a versatile choice for many rotating machinery applications. AutoDCSTech stocks this model and can assist with matching it to your specific requirements. Contact our team for pricing and lead time.