Bently Nevada 330101-00-60-05-02-05 3300 XL 8 mm Probe

Technical Specifications Breakdown

Key parameters for the 330101-00-60-05-02-05 are listed below for quick reference:

Industry Applications for the 3300 XL 8 mm Probe

The 2 mm (80 mils) linear range and Incremental Scale Factor of 7.87 V/mm (200 mV/mil) ensure accurate data for predictive maintenance. The patented TipLoc and CableLoc designs provide 330 N (75 lbf) pull strength, reducing failure risks in high-vibration environments.

Installation and Setup Guidance

Mount the probe using the 3/8-24 UNF thread into a suitable mounting hole. For radial vibration applications, set the recommended gap to -9 Vdc (approximately 1.27 mm or 50 mils). Use field wiring of 0.2 to 1.5 mm² (16 to 24 AWG) with a 3-conductor shielded triad cable. Maximum field wiring length between the Proximitor Sensor and monitor is 305 meters (1,000 feet).

Maintenance and Reliability

Inspect the probe and cable periodically for physical damage. The Viton® O-ring seals differential pressure between the tip and case. Avoid exposing the probe to temperatures below -34°C (-30°F) to prevent premature pressure seal failure. The probe withstands 93% humidity per IEC standard 68 2 3 with less than 3% change in Average Scale Factor.

Compatibility and Integration

The 330101-00-60-05-02-05 integrates with Bently Nevada 3300 XL Proximitor Sensors and monitoring systems. The miniature coaxial ClickLoc connector ensures reliable signal transmission. Standard 5 or 1 meter systems provide interchangeability error of ±5% over the linear range.

Selection Guide and Purchasing Advice

Choose this probe for applications requiring a rugged 8 mm design with CSA, ATEX, and IECEx approvals. Contact AutoDCSTech for lifecycle status and availability before ordering. AutoDCSTech offers genuine Bently Nevada parts with expert support.

Troubleshooting and Common Issues

If the probe outputs erratic signals, verify the cable connection and check for damage. Confirm the gap setting matches the recommended -9 Vdc. For high-temperature environments, consider the Extended Temperature Range probe option (tip rated to +218°C).