Bently Nevada 330101-00-60-10-02-CN 3300 XL 8 mm Probe, 3/8-24 UNF Thread

Technical Specifications Breakdown

Key parameters for the 330101-00-60-10-02-CN are listed below for quick reference:

Industry Applications

Its 2 mm linear range and high sensitivity (7.87 V/mm) enable early detection of shaft misalignment or bearing wear. Compared to smaller 5 mm probes, the 8 mm design offers greater robustness against physical abuse, making it suitable for high-vibration environments like oil and gas facilities.

Installation & Setup Guidance

Mount the probe using the 3/8-24 UNF thread into a suitable mounting hole. Ensure the target surface is clean and within the recommended gap setting of -9 Vdc (approximately 1.27 mm or 50 mils) for radial vibration. Use 3-conductor shielded triad cable for field wiring, up to 305 meters (1000 feet) from the Proximitor Sensor. The ClickLoc connector simplifies cable attachment and provides secure electrical connection.

Maintenance & Reliability

The probe's patented TipLoc and CableLoc designs enhance mechanical integrity, with 330 N (75 lbf) pull strength. Inspect the probe tip and cable periodically for damage, especially in high-temperature or high-humidity environments. The probe operates reliably from -52°C to +177°C, with less than 3% ASF change in 93% humidity. Avoid exposing to temperatures below -34°C to prevent pressure seal failure.

Robust Vibration Sensing for Critical Machinery

Industrial rotating machinery demands precise, reliable vibration monitoring to prevent catastrophic failures. The Bently Nevada 330101-00-60-10-02-CN is a 3300 XL 8 mm probe designed for eddy current displacement measurement in harsh environments. With a 3/8-24 UNF thread and no armor, this probe offers a rugged solution for radial vibration and position monitoring.

Compatibility & Integration

This probe works with Bently Nevada 3300 XL extension cables and Proximitor Sensors. The standard 7.87 V/mm scale factor ensures interchangeability within ±5% over 0°C to +45°C. For extended temperature ranges, the probe tip withstands up to +218°C. The miniature coaxial ClickLoc connector is compatible with standard 3300 XL systems.

Selection Guide & Purchasing Advice

When selecting a vibration probe, consider the required linear range, temperature range, and cable length. For longer cable runs or extreme temperatures, consult AutoDCSTech for alternative options. Please verify current lifecycle status and availability with AutoDCSTech before ordering.