Technical Specifications Breakdown
Key parameters for the 330103-00-06-05-02-RU are listed below for quick reference:
| Feature | Specification |
|---|---|
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Probe Case Thread | M10x1 |
| Unthreaded Length | 0 mm |
| Overall Case Length | 60 mm |
| Total Length | 0.5 meter (1.6 feet) |
| Connector Type | Miniature coaxial ClickLoc connector, standard cable |
| Linear Range | 2 mm (80 mils), from 0.25 to 2.3 mm (10 to 90 mils) |
| Recommended Gap Setting for Radial Vibration | -9 Vdc [approximately 1.27 mm (50 mils)] |
| Probe Temperature Range (Standard) | -52°C to +177°C (-62°F to +350°F) |
Industry Applications
Its 2 mm linear range and -9 Vdc recommended gap setting enable accurate radial vibration and shaft position measurements. The M10x1 thread simplifies installation in standard mounting holes, while the PPS tip resists wear and chemical exposure.
Installation & Setup Guidance
For field wiring, use 0.2 to 1.5 mm² (16 to 24 AWG) conductor with a 3-conductor shielded triad cable and tinned field wiring. Maximum cable length between the 3300 XL Proximitor Sensor and monitor is 305 meters (1,000 feet). Ensure the probe tip is clean and the target surface is smooth. Set the initial gap to -9 Vdc for radial vibration applications. Avoid exposing the probe to temperatures below -34°C (-30°F) to prevent premature pressure seal failure.
Maintenance & Reliability
Inspect the probe and cable periodically for physical damage. The probe is designed to seal differential pressure between tip and case using a Viton® O-ring. Relative humidity below 93% causes less than 3% change in Average Scale Factor (ASF) per IEC 68-2-3. For extended temperature ranges, the probe tip withstands up to +218°C (+425°F) and cable up to +260°C (+500°F).
Are you struggling with reliable vibration monitoring in harsh industrial environments?
The Bently Nevada 330103-00-06-05-02-RU 3300 XL 8 mm Proximity Probe delivers precise shaft displacement and vibration measurement for critical rotating machinery. This metric probe features a polyphenylene sulfide (PPS) tip and AISI 303 or 304 stainless steel case, ensuring durability in demanding conditions.
Compatibility & Integration
This probe works with Bently Nevada 3300 XL Proximitor Sensors and monitoring systems. For intrinsically safe installations, use zener barriers per drawing 141092 or galvanic isolators to achieve Class I, Zone 0: AEx/Ex ia IIC T5...T1 Ga. For non-incendive circuits, connect per drawing 140979 for Class I, Zone 2 ratings.
Selection Guide & Purchasing Advice
When selecting a replacement probe, verify the thread size (M10x1), overall length (60 mm case, 0.5 m total), and connector type (miniature coaxial ClickLoc). The 330103-00-06-05-02-RU is a metric version without armor. Please verify current lifecycle status and availability with AutoDCSTech before ordering.
Availability & Condition at AutoDCSTech
| Part Number | 330103-00-06-05-02-RU |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
