Reliable Vibration Monitoring with the Bently Nevada 330103-00-07-05-02-CN
Industrial rotating machinery requires precise, continuous monitoring to prevent catastrophic failures. The Bently Nevada 330103-00-07-05-02-CN is a 3300 XL 8 mm Proximity Probe designed for accurate shaft vibration and position measurements. This probe delivers the performance and durability needed in demanding environments.
Technical Specifications Breakdown
Key parameters for the 330103-00-07-05-02-CN are listed below for quick reference:
| Feature | Specification |
|---|---|
| Product Type | 3300 XL 8 mm Proximity Probe |
| Thread Size | M10 x 1 |
| Unthreaded Length | 00 mm |
| Overall Case Length | 07 mm |
| Total Length | 0.5 meter (1.6 feet) |
| Connector Type | Miniature coaxial ClickLoc connector |
| Cable Type | Standard cable |
| Agency Approval | CN Country Specific |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Linear Range | 2 mm (80 mils) |
| Recommended Gap Setting (Radial Vibration) | -9 Vdc [approximately 1.27 mm (50 mils)] |
| Probe Temperature Range (Standard) | -52°C to +177°C (-62°F to +350°F) |
| Probe Weight | 323 g/m (11.4 oz) |
Industry Applications
The 2 mm linear range (0.25 to 2.3 mm from target) provides the resolution needed for early fault detection. The PPS tip and stainless steel case withstand harsh conditions, reducing unplanned downtime.
Installation & Setup Guidance
When installing, ensure the probe thread engagement does not exceed 15 mm for the M10x1 thread. Use 3-conductor shielded triad cable with 0.2 to 1.5 mm² (16 to 24 AWG) tinned field wiring. The maximum field wiring length between the Proximitor Sensor and monitor is 305 meters (1,000 feet). Set the recommended gap to -9 Vdc for radial vibration measurements.
Maintenance & Reliability
Inspect the probe and cable periodically for physical damage or wear. Avoid exposing the probe to temperatures below -34°C (-30°F) to prevent premature pressure seal failure. The probe is designed to seal differential pressure between tip and case using a Viton O-ring; contact the custom design department if pressure testing is required.
Compatibility & Integration
The 330103-00-07-05-02-CN integrates with Bently Nevada 3300 XL Proximitor Sensors and monitoring systems. For intrinsically safe installations, use zener barriers per drawing 141092 or galvanic isolators. For non-incendive circuits, connect per drawing 140979.
Selection Guide & Purchasing Advice
Choose the 330103-00-07-05-02-CN for applications needing a 0.5 meter cable and Miniature coaxial ClickLoc connector. AutoDCSTech stocks this probe and can advise on lifecycle status and availability. Contact us before ordering to confirm fit for your specific machinery.
Availability & Condition at AutoDCSTech
| Part Number | 330103-00-07-05-02-CN |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
