330101-30-10-10-02-05: The 30Segment Case Configuration
The 3.0 in unthreaded length paired with a 1.0 in overall case is what distinguishes this configuration from the short-case variants in the 330101 family. The long unthreaded section is the point: it is the configuration for probe holders where the target surface sits deeper in the housing, or where the holder design needs the extra reach to achieve the specified gap without modifying the holder.
Decoded against the published configuration data: 330101 = 3300 XL 8 mm probe platform. 30 = unthreaded length option 3.0 in. 10 = overall case length option 1.0 in. 10 = total length 1.0 meter (3.3 feet). 02 = miniature coaxial ClickLoc connector, standard cable. 05 = agency approval option not required.
| Feature | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Brand | Bently Nevada |
| Part Number | 330101-30-10-10-02-05 |
| Unthreaded Length Option | 3.0 in |
| Overall Case Length Option | 1.0 in |
| Total Length Option | 1.0 meter (3.3 feet) |
| Connector and Cable-Type | Miniature coaxial ClickLoc connector, standard cable |
| Agency Approval Option | Not required |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel |
| Linear Range | 2 mm (80 mils) |
| Incremental Scale Factor (ISF) – Standard 5 or 1 m System | 7.87 V/mm (200 mV/mil) ±5% |
| Probe Temperature Range (Standard) | -52°C to +177°C (-62°F to +350°F) |
30Segment Against the Other Case Options
Case segment determines physical reach inside the probe holder. Matching it is not interchangeable with other segments:
| 3301xx Part Number | Case Segment Configuration |
|---|---|
| 330101-30-10-10-02-05 | same family, different configuration |
| 330101-30-49-10-02-05 | same family, different configuration |
| 330101-30-49-10-12-05 | same family, different configuration |
| 330101-30-60-05-01-05 | same family, different configuration |
| 330101-30-60-90-02-00 | same family, different configuration |
| 330101-30-63-10-02-00 | same family, different configuration |
| 330101-30-63-10-02-CN | same family, different configuration |
| 330101-30-63-15-02-CN | same family, different configuration |
| 330101-08-20-10-02-00 | same family, different configuration |
All Bently Nevada parts · Sensors & Instrumentation
Why the 05 Approval Suffix Matters in Hazardous Installations
The final two characters carry the approval option, and on this configuration the agency approval option is not required. Where an installation is in a classified area, the approval designation on the probe has to match what the area classification requires — a probe that is otherwise mechanically correct is not acceptable if its approval designation does not cover the installation.
Gap and Cable Routing
Recommended gap on this platform is -9 Vdc, approximately 1.27 mm (50 mils) for radial vibration monitoring. The longer case segment means the cable run from probe head to junction box is the full assembly length for this variant; if the existing route needs more, that is a different variant rather than an extension on this one.
Commissioning Checklist
- Confirm the case segment matches the probe holder in the machine (30 segment, not 08 or 00-84).
- Verify the approval designation covers the area classification of the installation.
- Set and confirm the gap voltage at the monitor end after installation.
- Confirm the ClickLoc connector is fully engaged and locked by rotation.
- Verify current lifecycle status and availability before ordering.
Supply & terms: Stock status: In Stock · Condition: New · Warranty: One Year · Origin: US. Listed by AutoDCS Tech Parts Team · Last updated .
Availability & Condition at AutoDCSTech
| Part Number | 330101-30-10-10-02-05 |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
