Technical Specifications Breakdown
Key parameters for the 330103-00-08-15-02-05 are listed below for quick reference:
| Feature | Specification |
|---|---|
| Product Type | 3300 XL 8 mm Proximity Probe |
| Thread Size | M10 x 1 |
| Unthreaded Length | 0 mm |
| Overall Case Length | 80 mm |
| Total Length | 1.5 meters (4.9 feet) |
| Connector Type | Miniature coaxial ClickLoc connector, standard cable |
| Agency Approvals | CSA, ATEX, IECEx |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Linear Range | 2 mm (80 mils), from 0.25 to 2.3 mm (10 to 90 mils) |
| Recommended Gap Setting (Radial Vibration) | -9 Vdc [approximately 1.27 mm (50 mils)] |
| Operating Temperature (Standard Probe) | -52°C to +177°C (-62°F to +350°F) |
Industry Applications
In a typical installation, the 330103-00-08-15-02-05 provides continuous shaft vibration monitoring, helping to detect early signs of imbalance or misalignment. Its CSA, ATEX, and IECEx approvals make it suitable for hazardous area installations, reducing the risk of unplanned downtime.
Installation & Setup Guidance
When installing the probe, ensure the M10 x 1 thread engagement does not exceed 15 mm. Use a 3-conductor shielded triad cable with tinned field wiring, and keep field wiring lengths under 305 meters (1,000 feet) to maintain signal integrity. The recommended gap setting for radial vibration is -9 Vdc, which corresponds to approximately 1.27 mm (50 mils) from the target. Always verify the probe's DC resistance (7.73 ± 0.50 ohms for the 1.5 m length) before commissioning.
Maintenance & Reliability
Inspect the probe cable and connector periodically for signs of wear or damage. The probe is designed to seal differential pressure with a Viton O-ring, but it is not pressure tested before shipment. For applications requiring pressure seal verification, contact the custom design department. Avoid exposing the probe to temperatures below -34°C (-30°F) to prevent premature seal failure.
Reliable Vibration Monitoring with the Bently Nevada 330103-00-08-15-02-05
This probe features an M10 x 1 thread, a total length of 1.5 meters (4.9 feet), and comes without armor. Its robust construction includes a polyphenylene sulfide (PPS) tip and an AISI 303 or 304 stainless steel case, ensuring durability in harsh industrial environments.
Compatibility & Integration
For hazardous locations, use intrinsically safe zener barriers per drawing 141092 or galvanic isolators for Class I, Zone 0 areas. For non-incendive circuits, follow drawing 140979 for Class I, Zone 2 installations.
Selection Guide & Purchasing Advice
When selecting a replacement probe, verify the total length, thread type, and connector option match your system requirements. The 330103-00-08-15-02-05 is available from AutoDCSTech, a reliable source for industrial automation parts. Please verify current lifecycle status and availability with AutoDCSTech before ordering.
Availability & Condition at AutoDCSTech
| Part Number | 330103-00-08-15-02-05 |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
