GE IC660ELB931 PCI Genius Interface Card for LAN Connectivity

Technical Specifications Breakdown

Key parameters for the IC660ELB931 are listed below for quick reference:

Industry Applications for Seamless Integration

It enables third-party devices such as CPUs and I/O blocks to interface with the bus, simplifying system expansion. For example, in a production line, the card can bridge a PC-based HMI with Genius bus controllers, allowing real-time monitoring and control. Its ability to handle up to 32 devices at a 153.6 Kbaud standard baud rate ensures efficient data exchange in medium-scale automation networks.

Installation and Setup Guidance

Install the IC660ELB931 into a standard PCI slot of a compatible personal computer. The onboard DIP switch allows selection of bus termination resistance (75, 100, 120, or 150 Ohms) to match the network cable impedance. Use a daisy-chain bus cable with a single twisted pair and shield. Ensure the 4-pin connector is securely fastened with holding screws. After installation, verify that the GENI OK LED illuminates to confirm power and self-diagnostics, and the COMM OK LED indicates active communication.

Maintenance and Reliability

Periodically inspect the card for dust accumulation on the PCI contacts and faceplate LEDs. Operate within the specified ambient temperature range of 0 to 60 degrees Celsius and humidity levels of 5% to 95% non-condensing to ensure long-term reliability. The card's UL and CE certifications confirm compliance with industrial safety standards, reducing the risk of electrical issues in harsh environments.

PCI Genius Interface for Industrial Communication

The IC660ELB931 PCI Genius Interface Card, manufactured by GE Fanuc as part of the Genius I/O series, provides a robust solution for integrating a personal computer's PCI slot with a single-channel general-purpose controller interface to the Genius serial bus. This module handles all interface and protocol tasks associated with Genius bus communications, complying with Rev 2.2 of the PCI Local Bus Specification. It is fully compatible with a handheld monitor and any GE Fanuc Genius bus controller, using 8,000 input and 8,000 output references. When configured as input-only, it reads Genius block information; as output-only, it writes to Genius block outputs. The card features a 4-pin right-angle male terminal box connector with holding screws and two LEDs (GENI OK and COMM OK) on the faceplate. It weighs 3 pounds and is available in code variations GEFIC660ELB931, CIMIC660ELB931, and 1C660ELB931.

Compatibility and Integration

The IC660ELB931 is designed for the Genius LAN interface and is compatible with all Genius bus communication protocols. It works with GE Fanuc Genius bus controllers and handheld monitors, providing an intelligent interface between a PC and Genius I/O blocks. The card uses 8,000 input and 8,000 output references, and its DIP switch configuration allows flexible bus termination. For systems requiring a PC-based gateway to Genius networks, this card offers a compact and proven solution.

Selection Guide and Purchasing Advice

When selecting the IC660ELB931, verify that your PC has an available PCI slot and that the operating system supports Rev 2.2 of the PCI Local Bus Specification. This card is not a direct replacement for older PCIM cards, so confirm compatibility with your existing Genius bus devices. AutoDCSTech stocks this GE Fanuc PCI Genius card and can assist with availability and lifecycle status. Please verify current lifecycle status and availability with AutoDCSTech before ordering.