Schneider TSXCANCBDD03 CANopen Cordset with Molded SUB-D9 Connectors

Technical Specifications Breakdown

Key parameters for the TSXCANCBDD03 are listed below for quick reference:

Industrial Applications and Use Cases

This cordset is designed for CANopen networks in automation environments such as packaging lines, material handling systems, and machine tools. The 0.3-meter length is particularly useful for connecting drives, I/O modules, or controllers located in close proximity within a panel. The molded connectors provide strain relief and protection against dust and accidental disconnection, reducing downtime caused by loose or damaged cables.

Installation and Setup Guidance

When installing this cordset, ensure the SUB-D9 connectors are aligned correctly and fully seated to avoid bent pins. The IP20 rating means it is suitable for clean, dry indoor environments; avoid exposure to moisture or excessive dust. For reliable CANopen communication, keep the cable away from high-voltage power lines and use proper termination resistors at the bus ends. No special tools are required for installation—simply plug and tighten the locking screws.

Maintenance and Reliability

The molded construction of this cordset minimizes wear at connection points. During routine inspections, check the connector housings for cracks and verify that locking screws are tight. The cable jacket should be free of cuts or abrasions. Given the IP20 protection, periodic cleaning with a dry cloth is sufficient. If the cordset is frequently disconnected, inspect the pins for deformation.

Reliable CANopen Connectivity for Industrial Networks

For maintenance engineers working with Schneider CANopen bus systems, the TSXCANCBDD03 CANopen cordset provides a dependable, pre-assembled connection solution. This cordset eliminates the variability of field-terminated cables, ensuring consistent signal integrity and reducing installation time.

Compatibility and Integration

This cordset is designed for Schneider CANopen devices and is compatible with standard CANopen networks. The female SUB-D9 connectors mate with male ports on drives, I/O modules, and controllers. For integration, ensure your device supports CANopen protocol and that the bus length, including this 0.3-meter segment, does not exceed the maximum allowed for your network speed.

Selection Guide and Purchasing Advice

When selecting a CANopen cordset, consider the required length and connector type. For longer runs, choose a cable with appropriate length and gauge. AutoDCSTech stocks this cordset and can assist with availability and lifecycle status. Please verify current lifecycle status and availability with AutoDCSTech before ordering.