Schneider TSXDSY64T2K Solid State Protected Output Module for TSX Micro PLCs

Technical Specifications Breakdown

• Output Count and Type: 64 solid state protected outputs ensure high-density control while guarding each channel against electrical faults. This density minimizes the number of modules needed, lowering overall system cost.
• Voltage and Current: Operates at 24 V DC positive (EN/IEC 61131-2 19...30 V) with a current per channel of ≤ 0.1 A and a module total of ≤ 5 A. The low per-channel current allows precise, energy-efficient switching, reducing power waste.
• Protection Features: Output overvoltage protection via transil diode, reverse polarity protection via reverse mounted diode, and automatic trip for both overload and short-circuit conditions. These features prevent damage to downstream equipment, saving on replacement and repair costs.
• Response Time: 1.2 ms response enables fast actuation in time-critical processes, improving throughput and reducing cycle times.
• Leakage Current: < 0.1 mA at 30 V ensures minimal power loss when outputs are off, contributing to lower energy bills over the module's lifespan.
• Paralleling of Outputs: Up to three outputs can be paralleled, offering flexibility to drive higher current loads without additional modules, a cost-effective design choice.

Industry Applications

In packaging lines, the TSXDSY64T2K controls multiple solenoid valves and actuators with its 64 outputs. The short-circuit protection automatically trips if a valve coil fails, preventing damage to the module and reducing unplanned maintenance costs. In material handling systems, the module's fast 1.2 ms response ensures precise conveyor routing, boosting overall equipment effectiveness (OEE) and lowering per-unit production costs.

Installation & Setup Guidance

Mount the TSXDSY64T2K in a standard TSX Micro PLC rack. Connect 24 V DC positive power to the module's supply terminals. Use the four HE-10 connectors for output wiring. Ensure load impedance exceeds 220 Ω at state 1 to guarantee reliable switching. The module's IP20 protection suits clean indoor environments; install in a cabinet with pollution degree 2 conditions. Paralleling outputs (up to three) requires identical load types and wiring lengths to balance current sharing.

Maintenance & Reliability

Routine inspection of the module's status LEDs and connected loads helps identify potential issues early. The solid state design eliminates mechanical wear, extending service life and reducing replacement frequency. Operating within 0...60 °C and 10...95% relative humidity (non-condensing) ensures stable performance. The automatic trip protection reduces the risk of catastrophic failure, lowering total cost of ownership over the module's lifecycle.

What Is the TSXDSY64T2K?

This solid state protected module belongs to the TSX Micro PLC product line and provides 64 discrete outputs designed for 24 V DC positive systems. It integrates comprehensive safeguards against short-circuits, overloads, and reverse polarity, reducing costly downtime and repair expenses.

Compatibility & Integration

It communicates via the backplane bus, requiring no additional configuration for basic operation. The module is compatible with Schneider Electric's range of TSX Micro processors and I/O bases. For system expansion, use the same 24 V DC power supply as other modules in the rack.

Selection Guide & Purchasing Advice

Before ordering, verify your system's power supply voltage (24 V DC positive) and ensure the total current per module does not exceed 5 A. The TSXDSY64T2K is available at AutoDCSTech, a reliable supplier of industrial automation parts. Check current lifecycle status and availability with AutoDCSTech before ordering to ensure timely delivery.