Allen-Bradley 2094-BC01-MP5-S Kinetix 6000 Integrated Axis Module

Technical Specifications Breakdown

Key parameters for the 2094-BC01-MP5-S are listed below for quick reference:

Industry Applications

The integrated design reduces wiring and cabinet footprint, while the 6 kW continuous power output supports medium-duty servo motors. The built-in Safe Torque Off (STO) functionality enhances operator safety during maintenance or emergency stops.

Installation & Setup Guidance

Mount the module on a Kinetix 6000 Power Rail with a minimum enclosure depth of 198 mm (7.8 in.). Ensure 50.8 mm (2.0 in.) clearance around the module for airflow. Connect a 3-phase AC supply within 324-528V rms at 47-63 Hz. For common-bus follower applications, provide 458-747 VDC. Use the embedded SERCOS interface to communicate with a ControlLogix PAC via a 1756-M0xSE module.

Maintenance & Reliability

With 97% efficiency, this module minimizes heat generation. Inspect the power rail connections and cooling fans periodically. Keep the enclosure clean and ensure ambient temperature stays within the specified range. The module's power dissipation varies from 46 W at 20% load to 77 W at 100% load, so adequate ventilation is essential.

Solving High-Torque Multi-Axis Motion Challenges

In complex manufacturing lines, coordinating multiple servo axes under varying loads is a common engineering challenge. The Allen-Bradley 2094-BC01-MP5-S Integrated Axis Module (IAM) addresses this by combining a converter and inverter in a single, compact unit. Designed for the Kinetix 6000 system, this module delivers reliable power and precise motion control for demanding applications.

Compatibility & Integration

It supports Kinetix MP, TL/TLY, RDB, 1326AB, and F-Series servo motors, as well as LDAT-Series, LDC-Series, and LDL-Series linear actuators. Dynamic drive configuration allows parameter changes based on logic triggers in the user program.

Selection Guide & Purchasing Advice

When selecting a replacement or new IAM, verify the voltage class and power requirements. The 2094-BC01-MP5-S is a 400 Volt class module with 6 kW continuous output. For peak loads, it delivers 12 kW. AutoDCSTech offers this module with expert support to ensure compatibility with your existing Kinetix 6000 system.