Product Overview
The Allen-Bradley 22B-D017F104 is an adjustable frequency drive from the PowerFlex 40 series by Rockwell Automation. Designed for three-phase AC input at 480 Volts AC, this drive delivers reliable motor control for demanding industrial applications. With a Size C frame and IP20 flange mount enclosure, the 22B-D017F104 integrates easily into PLC systems. Its sensorless vector control and autotune feature enable adaptive motor characteristics, while dynamic braking using low-cost brake resistors enhances system efficiency.
Technical Specifications Breakdown
Key parameters for the 22B-D017F104 are listed below for quick reference:
| Feature | Specification |
|---|---|
| Manufacturer | Rockwell Automation |
| Brand | Allen-Bradley |
| Part Number | 22B-D017F104 |
| Product Line | PowerFlex 40 |
| Voltage | 480 AC Volts |
| Enclosure | Flange Mount - IP20, NEMA/UL Type Open |
| HP | 10 Horsepower |
| Amperage | 17.0 A |
| Phase | 3 Phase |
| Filter | No CE Compliant Filter |
| Communication | RS-485 |
| Input Type | Keypad |
Industry Applications
Its 10 HP output and 17.0 A rating suit medium-duty loads. The RS-485 communication allows integration into multi-drive networks, supporting up to 31 units on one RTU. The sensorless vector control provides high torque at low speeds, making it suitable for mixers and extruders.
Installation & Setup Guidance
Mount the 22B-D017F104 in a clean, dry location with adequate airflow. Use the IP20 flange mount enclosure for panel installation. Connect 3-phase 480V AC power to the input terminals. Configure parameters via the integral keypad or RS-485 using standard 03 or 06 RTU commands. Perform autotune to optimize motor characteristics. Ensure dynamic braking resistors are properly sized and connected to the brake IGBT terminals.
Maintenance & Reliability
Inspect the drive periodically for dust buildup on heatsinks and fans. Verify that the IP20 enclosure remains sealed. Check all power and control wiring for tightness. Monitor ambient temperature to stay within the unit's operating range. The 24V sink/source control voltage should be verified during routine maintenance.
Compatibility & Integration
The 22B-D017F104 communicates via RS-485 and supports Modbus RTU protocol. It can be programmed from a PC and used in multi-network configurations. Compatible with Allen-Bradley PLCs and other master RTU devices. The NEMA/UL Type 4X remote and Type 1 handheld LCD keypad provide flexible operator interface options.
Selection Guide & Purchasing Advice
When selecting the 22B-D017F104, confirm your motor's voltage and current requirements match the 480V AC, 17.0 A output. For applications requiring CE compliance, note this unit does not include a CE compliant filter. Contact AutoDCSTech for availability and lifecycle status before ordering. AutoDCSTech offers genuine Allen-Bradley parts with expert support.
Please verify current lifecycle status and availability with AutoDCSTech before ordering.
Availability & Condition at AutoDCSTech
| Part Number | 22B-D017F104 |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
