Introduction
When signal integrity is compromised by electrical noise or physical damage in industrial environments, the Bently Nevada 16710-32 Interconnect Cable with Armor provides a robust solution. This 32-foot cable ensures reliable transmission between sensors and monitoring systems, even in the most demanding conditions.
Technical Specifications Breakdown
The Bently Nevada 16710-32 features a 3-conductor shielded 22 AWG (0.5 mm²) armored cable. The armor protects against crushing and abrasion, while the shield minimizes electromagnetic interference. One end terminates with a 3-socket plug for quick connection; the other end has terminal lugs for secure wiring. The cable length is exactly 32 feet, with a minimum available length of 3.0 ft (0.9 m) and a maximum of 99 ft (30 m).
Industry Applications
In rotating machinery monitoring, the 16710-32 connects proximity probes or seismic transducers to Bently Nevada monitors. Its armored construction withstands high-vibration areas near turbines and compressors. For petrochemical plants, the shielded design rejects RFI from nearby motors, ensuring accurate vibration data for predictive maintenance.
Installation & Setup Guidance
When installing the 16710-32, route the cable away from high-voltage lines to maintain signal purity. Secure the armor at both ends to prevent stress on the connectors. The 3-socket plug mates directly with Bently Nevada monitors; the terminal lugs should be crimped or soldered per manufacturer torque specs. Verify the cable is not kinked or pinched during installation.
Maintenance & Reliability
Periodically inspect the armor for dents or cuts that could expose the inner conductors. Check the plug and lugs for corrosion or looseness. The shielded construction reduces signal degradation over time, extending the service life of your monitoring system. Replacing worn cables proactively prevents unexpected downtime.
Compatibility & Integration
The 16710-32 is designed for Bently Nevada monitoring systems that accept 3-socket plug connections. It works with proximity probe systems and seismic transducers requiring shielded armored cable. Ensure your monitor's input connector matches the 3-socket plug, and the terminal lugs fit your junction box or termination panel.
Selection Guide & Purchasing Advice
Before ordering, confirm the required cable length: the 16710-32 is 32 feet. If you need a different length, Bently Nevada offers cables from 3.0 ft to 99 ft. Verify the connector type matches your equipment. SpareTechPLC stocks this model and can advise on compatibility with your existing Bently Nevada hardware.
Frequently Asked Questions
Q: What is the conductor size of the 16710-32?
A: The cable uses 3-conductor shielded 22 AWG (0.5 mm²) wire, suitable for low-level signal transmission.
Q: Can I cut the cable to a shorter length?
A: It is not recommended to cut the cable, as the armor and shield termination are factory-installed. Order the exact length needed.
Q: Is the cable suitable for outdoor use?
A: The armor provides mechanical protection, but the cable is intended for indoor industrial environments unless additional weatherproofing is applied.
Q: What is the maximum cable length available?
A: The maximum length is 99 ft (30 m) to maintain signal integrity.
Q: Does the cable come with connectors on both ends?
A: Yes, one end has a 3-socket plug, the other has terminal lugs.
