Bently Nevada 24701-16-05-15-120-03-02 Proximity Probe Housing Assembly

Technical Specifications Breakdown

Key parameters for the 24701-16-05-15-120-03-02 are listed below for quick reference:

Installation and Setup Guidance

Mount the housing using the 3/4-14 NPT thread into a compatible port on the machine casing. The included fittings—a 3/4-14 NPT plug, a 3/4-14 to 1/2-14 NPT reducer, and a cable seal grip with grommets for cable diameters from 1/8 to 3/8 inches—allow flexible conduit connections. Ensure the probe cable (0.5 m) is routed without sharp bends. The standoff adapter (minimum 1.5 in) provides clearance for proper probe positioning. Verify the probe tip gap per manufacturer guidelines before locking the assembly.

Maintenance and Reliability

Periodically inspect the housing for signs of vibration loosening or corrosion, especially in high-temperature or chemically aggressive atmospheres. Check O-rings and thread seals during routine machine overhauls. The stainless steel construction resists degradation, but regular visual checks ensure long-term sealing integrity. No disassembly of the probe or housing is required for basic inspections.

Robust Protection for Critical Vibration Monitoring

Industrial rotating machinery demands precise and reliable vibration measurement to prevent catastrophic failures. The Bently Nevada 24701-16-05-15-120-03-02 proximity probe housing assembly provides a rugged, sealed enclosure for the 3300 XL 8mm proximity probe, ensuring consistent performance in harsh environments. This assembly is engineered for applications where probe integrity and signal stability are paramount, offering a complete solution for continuous machine health monitoring.

Optimized for Turbomachinery and Compressors

The 12-inch probe penetration and 3/4-14 NPT mounting thread suit deep bearing housings and casings. The 303 stainless steel body and 304 stainless steel sleeve resist corrosion in oil-mist and high-humidity environments. By ensuring the probe remains securely positioned, the assembly reduces false trips and unplanned downtime, directly improving operational ROI.

Selection Guide and Purchasing Advice

When selecting a proximity probe housing assembly, verify probe type, cable length, and mounting thread compatibility with your machine. The 24701-16-05-15-120-03-02 is configured for a 3300 XL 8mm probe with a 0.5 m cable and 3/4-14 NPT mounting. For different probe lengths or thread sizes, consult the suffix code options. AutoDCSTech stocks this assembly as new and original in factory packing with a 12-month warranty. Please verify current lifecycle status and availability with AutoDCSTech before ordering.