Bently Nevada 24701-28-10-00-090-00-01 Proximity Probe Housing Assembly

Technical Specifications Breakdown

Key parameters for the 24701-28-10-00-090-00-01 are listed below for quick reference:

Application in Turbomachinery Protection

This housing assembly is engineered for use in steam turbines, compressors, and large pumps where shaft vibration must be continuously monitored. The 9-inch probe penetration allows it to reach the measurement target through thick casings, while the 1.0 m cable length provides flexibility in routing to the proximitor. The 303/304 stainless steel construction withstands oil, moisture, and temperature variations typical in rotating equipment environments.

Installation and Setup Guidance

When installing the 24701-28-10-00-090-00-01, ensure the mounting surface is clean and free of debris. The assembly includes a dome cover, threaded ports for conduit connections, and a probe sleeve of optional length. Use the O-rings and thread seal provided to maintain environmental integrity. The maximum (C) + (D) dimension with visible probe (P/N and S/N) is 17.0 in (43.18 mm), and the overall maximum (C) + (D) dimension is 29.2 in (74.2 mm). Verify these clearances before final mounting.

Maintenance and Reliability Considerations

Periodically inspect the housing for signs of corrosion or mechanical damage. Check that all O-rings and seals remain intact to prevent ingress of contaminants. The stainless steel materials offer resistance to common industrial fluids, but regular visual checks are recommended. No internal adjustments are required; the assembly is a passive mechanical enclosure.

Robust Vibration Monitoring with the Bently Nevada 24701-28-10-00-090-00-01

Industrial rotating machinery demands precise, reliable vibration monitoring to prevent catastrophic failures. The Bently Nevada 24701-28-10-00-090-00-01 proximity probe housing assembly provides a rugged, sealed enclosure for a 3300 XL 8mm probe, ensuring accurate shaft displacement measurements in harsh environments. This assembly combines a 303 stainless steel body with a 304 stainless steel sleeve for corrosion resistance and mechanical strength.

Selection Guide and Purchasing Advice

Select the correct model suffix codes to match your probe and application requirements. The 24701-28-10-00-090-00-01 is available as new and original in factory packing from AutoDCSTech, with a 12-month factory warranty. Please verify current lifecycle status and availability with AutoDCSTech before ordering. Our team can assist with cross-referencing and compatibility questions.