Bently Nevada 31000-16-05-00-037-03-02 Proximity Probe Housing

Technical Specifications Breakdown

Key parameters for the 31000-16-05-00-037-03-02 are listed below for quick reference:

Installation Guidance for Reliable Performance

When installing the 31000-16-05-00-037-03-02, use the provided fittings: two plugs, one 3/4-14 NPT fitting, one 3/4-14 to 1/2-14 NPT SST reducer, and a cable seal grip with grommets for cable sizes from 1/8 to 3/8 inches. Tighten the retaining nut to a recommended torque of 29.4 N·m (260 in·lb) to ensure a proper seal. Verify that the grounding liner is installed to maintain electrostatic dissipation.

Maintenance and Reliability Considerations

Regularly inspect the housing for signs of physical damage, especially after extreme temperature cycles or mechanical impacts. Check the O-ring and cable seal grommets for wear or degradation. Clean the exterior with a mild detergent and water; avoid abrasive cleaners that could damage the PPS surface. For long-term reliability, verify that all fittings remain tight and that the grounding path is intact.

Robust Protection for Critical Vibration Monitoring

Industrial rotating machinery demands reliable vibration monitoring to prevent catastrophic failures. The Bently Nevada 31000-16-05-00-037-03-02 proximity probe housing provides a rugged, sealed enclosure designed to protect sensitive 3300 XL 8 mm probes in the most demanding environments. With certified Type 4X and IP66 ratings, this housing ensures continuous operation in wet, dusty, or corrosive conditions.

Engineered for Harsh Environments

This housing is built from glass-reinforced Polyphenylene Sulfide (PPS) thermoplastic containing conductive fibers, providing chemical resistance and electrostatic dissipation for hazardous area compliance. The outer sleeve and exterior screws are AISI 303 stainless steel, while the sleeve material and retaining chain use AISI 304 stainless steel for superior corrosion resistance. The Neoprene O-ring ensures a reliable seal against moisture and contaminants.

Certified Protection for Hazardous Locations

The 31000-16-05-00-037-03-02 carries multiple certifications for demanding applications. The Type 4X rating, certified by the Canadian Standards Association (CSA), confirms protection against water ingress, corrosion, and dust. The IP66 rating, verified by SC115582-1 (e) 106, ensures the housing withstands powerful water jets and heavy seas. Additionally, it meets CENELEC standard EN50014 for electrostatic dissipation of plastic materials in hazardous areas.

Impact Resistance and Mechanical Robustness

Certified by BASEEFA to withstand two separate 4 Joule (3.0 ft·lb) impacts at extreme temperatures of -39°C (-38°F) and 115°C (239°F), this housing delivers exceptional durability. Samples also passed CSA verification for a 7 Joule (5.2 ft·lb) impact at ambient room temperature. The housing supports a load of 912 N (205 lb) when properly mounted, ensuring stability in high-vibration environments.

Selection Guide and Purchasing Advice

When selecting a proximity probe housing, consider the probe type, cable length, and environmental protection required. The 31000-16-05-00-037-03-02 is configured for a 3300 XL 8 mm probe with a 0.5 m cable and 3.7 in penetration, making it suitable for standard bearing housing measurements. For assistance with compatibility or alternative configurations, contact the experts at AutoDCSTech. Please verify current lifecycle status and availability with AutoDCSTech before ordering.