Bently Nevada 31000-16-10-15-201-02-02 Proximity Probe Housing Assembly

Technical Specifications Breakdown

Key parameters for the 31000-16-10-15-201-02-02 are listed below for quick reference:

Application Versatility

• Refinery Compressor Trains: The 31000-16-10-15-201-02-02 reliably monitors shaft vibration in high-temperature, corrosive environments. The stainless steel sleeve and conductive PPS housing resist chemical attack and static buildup.
• Power Generation Turbines: With a temperature range of -51°C to +105°C, this housing performs in both cryogenic startup conditions and near-turbine heat.
• Chemical Processing Pumps: The Type 4X/IP66 sealing prevents liquid ingress from hose-down cleaning, while the 3/4-14 NPT fittings simplify installation into existing piping.

Installation Guidance

When installing the 31000-16-10-15-201-02-02, ensure the mounting thread (3/4-14 NPT) is properly sealed with approved thread sealant to maintain the IP66 rating. The retaining nut should be torqued to 29.4 N·m (260 in·lb) as recommended. The housing is designed to seal differential pressure between the probe tip and main body when used with a 3300 XL 8 mm probe, but it is not intended to resist internal or external pressure. Always verify probe cable length (1.0 m) and standoff adapter (1.5 in) match your machine geometry.

Maintenance and Reliability

Periodically inspect the Neoprene O-ring between the sleeve and housing for signs of wear or compression set. The outer sleeve and retaining chain (AISI 304 stainless steel) and exterior screws (AISI 303) offer corrosion resistance. The glass-reinforced PPS housing provides high strength and dimensional stability over the full temperature range. No internal pressure testing is performed prior to shipment; contact the custom design department if your application requires a pressure seal test.

Robust Protection for Critical Vibration Monitoring

Industrial rotating machinery demands reliable vibration monitoring to prevent catastrophic failures. The Bently Nevada 31000-16-10-15-201-02-02 proximity probe housing assembly provides a rugged, sealed enclosure for 3300 XL 8 mm probes, ensuring accurate measurements even in the harshest environments. This housing is engineered to withstand extreme temperatures, impacts, and moisture ingress, making it a trusted choice for refineries, power plants, and chemical facilities.

Engineered for Extreme Conditions

This housing assembly is built to survive the most demanding industrial environments. It carries a Type 4X rating certified by CSA and an IP66 rating verified by SC115582-1 (e) 106, meaning it is protected against dust ingress and powerful water jets. The CENELEC EN50014 rating ensures safe electrostatic dissipation in hazardous areas. The housing impact strength is certified by BASEEFA to withstand two separate 4 Joule impacts at -39°C and at 115°C, with CSA verifying a 7 Joule impact at ambient temperature.

Compatibility and Integration

This housing is specifically designed for use with Bently Nevada 3300 XL 8 mm proximity probes. The two 3/4-14 NPT fittings allow conduit or cable entry, and the included plug seals unused openings. The mounting thread option (3/4-14 NPT) is required when ordering the standoff adapter.

Selection Guide and Purchasing Advice

When selecting a replacement or new housing, verify that the probe option (16 = 3300 XL 8 mm), cable length (10 = 1.0 m), standoff adapter (15 = 1.5 in), and penetration (201 = 20.1 in) match your machine specifications. The 31000-16-10-15-201-02-02 is available from AutoDCSTech, a trusted supplier of industrial automation parts. Please verify current lifecycle status and availability with AutoDCSTech before ordering.