Bently Nevada 330101-00-12-05-02-00 3300 XL 8 mm Probe, 3/8-24 UNF Thread

Technical Specifications Breakdown

Key parameters for the 330101-00-12-05-02-00 are listed below for quick reference:

Industry Applications and Cost Impact

Its robust PPS tip and stainless steel case withstand harsh environments, reducing replacement frequency and total cost of ownership. The patented TipLoc and CableLoc designs provide 330 N (75 lbf) pull strength, minimizing cable damage and signal loss. Using the 330101-00-12-05-02-00 helps avoid expensive emergency repairs by enabling early detection of shaft vibration anomalies.

Installation and Setup Guidance

For optimal performance, mount the probe with the recommended radial vibration gap setting of -9 Vdc. Use field wiring of 0.2 to 1.5 mm² (16 to 24 AWG) with a three-conductor shielded triad cable. The maximum field wiring length between the 3300 XL Proximitor Sensor and the monitor is 305 meters (1,000 feet). Ensure the probe tip is clean and free from debris before installation.

Maintenance and Reliability

Inspect the probe and cable periodically for physical damage or wear. The probe is designed to seal differential pressure with a Viton® O-ring; avoid exposing it to temperatures below -34°C (-30°F) to prevent premature pressure seal failure. The standard probe operates reliably from -52°C to +177°C (-62°F to +350°F).

Cost-Effective Vibration Monitoring with the Bently Nevada 330101-00-12-05-02-00

Investing in reliable vibration monitoring is critical to reducing unplanned downtime and extending machinery life. The Bently Nevada 330101-00-12-05-02-00 3300 XL 8 mm probe delivers accurate, repeatable measurements that help you avoid costly failures. By using a proven eddy current sensing design, this probe provides a linear range of 2 mm (80 mils) starting at approximately 0.25 mm (10 mils) from the target, ensuring precise gap settings for radial vibration monitoring at -9 Vdc (approximately 1.27 mm or 50 mils).

Compatibility and Integration

This probe is part of the 3300 XL system and works with 3300 XL extension cables and Proximitor sensors. The miniature coaxial ClickLoc connector ensures secure, quick connections. For systems requiring longer cable runs, the 9-meter system offers an Incremental Scale Factor of 7.87 V/mm (200 mV/mil) ± 6.5%.

Selection Guide and Purchasing Advice

When selecting a vibration probe, consider the total system length and environmental conditions. The 330101-00-12-05-02-00 is a 0.5-meter system with standard cable, suitable for many industrial applications. For extended temperature ranges up to +218°C (+425°F) at the probe tip, choose the ETR option. Contact AutoDCSTech to verify current lifecycle status and availability before ordering.