Technical Specifications Breakdown
Key parameters for the 330101-00-26-10-02-05 are listed below for quick reference:
| Feature | Specification |
|---|---|
| Product Type | 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor |
| Unthreaded Length Option | 00 = 0.0 in |
| Overall Case Length Option | 26 = 2.6 in |
| Total Length Option | 10 = 1.0 meter (3.3 feet) |
| Connector and Cable-Type Option | 02 = Miniature coaxial ClickLoc connector, standard cable |
| Agency Approval Option | 05 = CSA, ATEX, IECEx Approvals |
| Linear Range | 2 mm (80 mils). Linear range begins at approximately 0.25 mm (10 mils) from target and is from 0.25 to 2.3 mm (10 to 90 mils) (approximately –1 to –17 Vdc). |
| Incremental Scale Factor (ISF) – Standard 5 or 1 meter System | 7.87 V/mm (200 mV/mil) ± 5% including interchangeability error when measured in increments of 0.25 mm (10 mils) over the 80 mil linear range from 0°C to +45°C (+32°F to +113°F). |
| Probe Temperature Range – Standard Probe | -52°C to +177°C (-62°F to +350°F) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
Industry Applications and Failure Prevention
Its 2 mm linear range and high sensitivity (7.87 V/mm) enable early detection of shaft vibration and position changes. By providing accurate data, the probe helps prevent catastrophic bearing failures and unplanned downtime. The robust stainless steel case and patented TipLoc molding method ensure reliable operation even under mechanical stress.
Installation and Setup Guidance
Proper mounting is essential for accurate readings. The 3/8-24 UNF thread allows secure installation into standard mounting holes. Recommended probe case torque for standard forward mounted probes is 11.2 N•m (100 in•lbf). For the first three threads, use 7.5 N•m (66 in•lbf). Ensure the probe tip is clean and the target surface is free of coatings. The recommended gap setting for radial vibration is -9 Vdc (approximately 1.27 mm or 50 mils). Field wiring should use 3 conductor shielded triad cable with a maximum length of 305 meters (1,000 feet) between the Proximitor Sensor and the monitor.
Maintenance and Reliability
The probe is designed for long-term reliability in demanding environments. The probe tip material is polyphenylene sulfide (PPS), providing chemical resistance. The probe can withstand 93% humidity for up to 56 days with less than 3% change in Average Scale Factor. For standard probes, the operating temperature range is -52°C to +177°C. Exposing the probe to temperatures below –34˚C (-30˚F) may cause premature failure of the pressure seal. Inspect the probe and cable periodically for physical damage.
Reliable Vibration Monitoring with the Bently Nevada 3300 XL 8 mm Probe
Rotating machinery in critical industrial processes demands precise and durable vibration sensing. The Bently Nevada 330101-00-26-10-02-05 3300 XL 8 mm Probe delivers the accuracy and robustness needed for continuous protection. This non-contact eddy current probe is designed for radial vibration and position measurement in harsh environments.
Compatibility and Integration
This probe is part of the 3300 XL system and works with compatible Bently Nevada Proximitor Sensors and monitors. The miniature coaxial ClickLoc connector ensures a secure and quick connection. The probe is available with CSA, ATEX, and IECEx approvals for use in hazardous areas. Please verify current lifecycle status and availability with AutoDCSTech before ordering.
Availability & Condition at AutoDCSTech
| Part Number | 330101-00-26-10-02-05 |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
