Bently Nevada 330101-00-27-10-02-00 3300 XL 8 mm Probe

Technical Specifications Breakdown

Key parameters for the 330101-00-27-10-02-00 are listed below for quick reference:

Industry Applications and Cost-Benefit Analysis

By providing early warning of shaft misalignment, imbalance, or bearing wear, it helps avoid catastrophic failures that can cost tens of thousands in repairs and lost production. The 3300 XL series patented TipLoc and CableLoc designs enhance mechanical integrity, reducing false readings and extending service life—a direct benefit to your maintenance budget.

Installation and Setup Guidance

Proper installation is critical for accurate measurements. Mount the probe using the 3/8-24 UNF thread, ensuring the recommended gap setting of -9 Vdc (approximately 1.27 mm or 50 mils) for radial vibration. Use 3-conductor shielded triad cable for field wiring, with a maximum length of 305 meters (1,000 feet) between the Proximitor Sensor and the monitor. Torque the probe case to the recommended 11.2 N•m (100 in•lbf) for standard forward mounted probes.

Maintenance and Reliability

Inspect the probe and cable periodically for physical damage or contamination. The probe operates reliably in temperatures from -52°C to +177°C (-62°F to +350°F) for standard versions. Avoid exposing the probe to temperatures below -34°C (-30°F) to prevent premature failure of the pressure seal. The robust PPS tip and stainless steel case resist harsh environments.

Reliable Vibration Monitoring for Critical Machinery

When protecting high-value rotating assets, accurate and durable vibration sensing is non-negotiable. The Bently Nevada 330101-00-27-10-02-00 3300 XL 8 mm Probe delivers the robust performance and precise measurements needed to detect early signs of mechanical faults, reducing unplanned downtime and maintenance costs. This probe is designed for demanding industrial environments where reliability directly impacts operational ROI.

Compatibility and Integration

This probe is designed for use with Bently Nevada 3300 XL extension cables and Proximitor sensors. The miniature coaxial ClickLoc connector ensures a secure, quick connection. The system provides a standard incremental scale factor of 7.87 V/mm (200 mV/mil), ensuring consistent output across the 2 mm linear range.

Selection Guide and Purchasing Advice

When selecting a replacement or new probe, verify the thread type, cable length, and connector option. The 330101-00-27-10-02-00 is a 1.0 meter (3.3 feet) probe with a ClickLoc connector and no armor. For applications requiring oil leakage prevention, consider the optional FluidLoc cable. Please verify current lifecycle status and availability with AutoDCSTech before ordering. AutoDCSTech offers genuine Bently Nevada parts with expert support.

Troubleshooting and Common Issues

If the output signal is erratic or out of range, first check the probe gap and ensure it is within the linear range (0.25 to 2.3 mm from target). Verify the field wiring connections and cable integrity. If the probe tip is damaged, replace the probe. For persistent issues, consult the full 3300 XL system manual for advanced diagnostics.