Technical Specifications Breakdown
Key parameters for the 330101-00-54-10-02-00 are listed below for quick reference:
| Feature | Specification |
|---|---|
| Probe Type | 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor |
| Unthreaded Length Option | 00 – 0.0 in |
| Overall Case Length Option | 54 – 5.4 in |
| Total Length Option | 10 – 1.0 metre (3.3 feet) |
| Connector and Cable-Type Option | 02 – Miniature coaxial ClickLoc connector, standard cable |
| Linear Range | 2 mm (80 mils), from 0.25 to 2.3 mm (10 to 90 mils) |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) ±5% (standard 5 or 1 meter system) |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Operating Temperature (Standard Probe) | -52°C to +177°C (-62°F to +350°F) |
Industry Applications
The 2 mm linear range and high sensitivity (7.87 V/mm) enable precise measurement of shaft displacement, helping operators detect early signs of bearing wear, imbalance, or misalignment. The robust stainless steel case and PPS tip withstand harsh conditions, including exposure to oil and moisture.
Installation & Setup Guidance
When installing the 330101-00-54-10-02-00, ensure the probe tip is clean and the target surface is free of scratches or coatings. The recommended gap setting for radial vibration is -9 Vdc, corresponding to approximately 1.27 mm (50 mils). Use the supplied ClickLoc connector for a secure, quick connection to the extension cable. Field wiring should use 3-conductor shielded triad cable with tinned ends, 16 to 24 AWG, and must not exceed 305 meters (1,000 feet) between the Proximitor sensor and monitor to avoid signal roll-off.
Maintenance & Reliability
Periodically inspect the probe cable and connector for signs of wear or damage. The probe is designed to seal differential pressure between tip and case using a Viton O-ring; avoid exposing the probe to temperatures below -34°C (-30°F) to prevent premature seal failure. The probe can operate in up to 93% relative humidity with less than 3% change in Average Scale Factor (ASF) over 56 days per IEC 68-2-3.
Robust Vibration Sensing for Critical Machinery
The Bently Nevada 330101-00-54-10-02-00 is a 3300 XL 8 mm probe designed for reliable shaft vibration and position measurement in rotating machinery. This non-contact eddy current probe features a 3/8-24 UNF thread and is supplied without armor, making it suitable for a wide range of industrial applications where space and mounting flexibility are key.
Built on the proven 3300 XL platform, this probe incorporates patented TipLoc and CableLoc technologies for enhanced mechanical integrity. The TipLoc molding method creates a robust bond between the probe tip and body, while the CableLoc design provides 330 N (75 lbf) pull strength to secure the cable and tip. These innovations reduce the risk of probe failure in high-vibration environments.
Selection Guide & Purchasing Advice
The 330101-00-54-10-02-00 is a standard-length probe with a 1.0 metre cable and miniature coaxial ClickLoc connector. For applications requiring longer cables or different connectors, review the full 3300 XL probe options. Please verify current lifecycle status and availability with AutoDCSTech before ordering. AutoDCSTech offers fast shipping and expert support for all Bently Nevada products.
Availability & Condition at AutoDCSTech
| Part Number | 330101-00-54-10-02-00 |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
