Bently Nevada 330101-00-59-10-01-05 3300 XL 8 mm Probe, 3/8-24 UNF Thread, Without Armor

Technical Specifications Breakdown

Key parameters for the 330101-00-59-10-01-05 are listed below for quick reference:

Industry Applications

Steam and Gas Turbine Monitoring

The 2 mm linear range and -9 Vdc recommended gap setting (approximately 1.27 mm or 50 mils) provide consistent data for trend analysis and alarm management.

Compressor and Pump Protection

For centrifugal compressors and large pumps, the robust stainless steel case and TipLoc molding method ensure long-term reliability. The patented CableLoc design provides 330 N (75 lbf) pull strength, reducing the risk of cable damage during installation or maintenance.

Installation and Setup Guidance

When installing the 330101-00-59-10-01-05, follow these engineering best practices:

• Thread Engagement: The probe case thread is 3/8-24 UNF. Maximum thread engagement length is 0.563 in. Do not exceed this limit to avoid mechanical interference.
• Torque Values: For standard forward-mounted probes, the maximum rated torque is 33.9 N•m (300 in•lbf), with a recommended torque of 11.2 N•m (100 in•lbf). For the first three threads, use a maximum of 22.6 N•m (200 in•lbf) and a recommended 7.5 N•m (66 in•lbf).
• Field Wiring: Use 3-conductor shielded triad cable (0.2 to 1.5 mm² or 16 to 24 AWG). Maximum field wiring length between the 3300 XL Proximitor Sensor and the monitor is 305 meters (1,000 feet).

Maintenance and Reliability

This probe is designed for minimal maintenance. The PPS probe tip withstands operating temperatures up to +177°C (standard) or +218°C (extended temperature range probe tip). The Viton® O-ring seals differential pressure between the tip and case. Inspect the connector and cable periodically for damage, especially in high-humidity environments (the probe shows less than 3% change in ASF after 56 days at 93% humidity per IEC 68-2-3).

Robust Vibration Monitoring for Critical Machinery

For maintenance engineers, reliable vibration data is essential to prevent unplanned downtime. The Bently Nevada 330101-00-59-10-01-05 3300 XL 8 mm Probe delivers the precision and durability required for continuous monitoring of rotating equipment. This probe, featuring a 3/8-24 UNF thread and designed without armor, provides a direct, accurate measurement of shaft vibration and position.

Compatibility and Integration

The 330101-00-59-10-01-05 is part of the 3300 XL series and is compatible with 3300 XL Proximitor Sensors and monitoring systems. The miniature coaxial ClickLoc connector ensures a secure, quick connection. For systems requiring extended temperature range, verify the probe variant matches your environment.

Selection Guide and Purchasing Advice

When selecting a replacement or new probe, confirm the thread size (3/8-24 UNF), overall length (1.0 meter), and required agency approvals (CSA, ATEX, IECEx). The unthreaded length (0.0 in) and case length (5.9 in) are fixed for this part number. Contact AutoDCSTech for lifecycle status and availability before ordering.

Please verify current lifecycle status and availability with AutoDCSTech before ordering.