Technical Specifications Breakdown
Key parameters for the 330102-00-43-05-02-05 are listed below for quick reference:
| Feature | Specification |
|---|---|
| Probe Type | 3300 XL 8 mm Proximity Probe |
| Thread Size | 3/8-24 UNF |
| Unthreaded Length | 0.0 in |
| Overall Case Length | 4.3 in |
| Total Length | 0.5 meter (1.6 feet) |
| Connector Type | Miniature coaxial ClickLoc connector, standard cable |
| Agency Approvals | CSA, ATEX, IECEx |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Linear Range | 2 mm (80 mils) |
| Recommended Gap Setting (Radial Vibration) | -9 Vdc [approximately 1.27 mm (50 mils)] |
| Operating Temperature Range (Standard Probe) | -52°C to +177°C (-62°F to +350°F) |
Industry Applications for the 3300 XL Proximity Probe
Use it for radial vibration and axial position monitoring on steam turbines, centrifugal compressors, and large pumps. The PPS tip withstands harsh conditions, while the stainless steel case resists corrosion. The 0.5-meter cable length is specifically designed for use with the 5-meter Proximitor sensor, ensuring signal integrity.
Installation and Setup Guidance
Mount the probe using the 3/8-24 UNF thread with a maximum thread engagement of 0.563 inches. For field wiring, use 0.2 to 1.5 mm² (16 to 24 AWG) three-conductor shielded triad cable. The maximum distance between the Proximitor sensor and the monitor is 305 meters (1,000 feet). Set the initial gap to approximately -9 Vdc (1.27 mm) for radial vibration measurements. Always follow the manufacturer's torque specifications.
Maintenance and Reliability
Inspect the probe and cable periodically for physical damage, especially near the connector. Keep the probe tip clean and free of debris. The probe is designed to seal differential pressure via a Viton O-ring; avoid exposing it to temperatures below -34°C (-30°F) to prevent premature seal failure. For extended temperature ranges, the tip withstands up to +218°C (+425°F) and the cable up to +260°C (+500°F).
Compatibility and Integration
This 0.5-meter probe is intended for use exclusively with the 5-meter Proximitor sensor. It is part of the Bently Nevada 3300 XL series, ensuring seamless integration with compatible monitoring systems. The miniature coaxial ClickLoc connector provides a secure, quick connection.
Selection Guide and Purchasing Advice
When selecting a replacement or new probe, verify the total length, thread type, and connector match your existing system. The 330102-00-43-05-02-05 is a standard-length probe with CSA, ATEX, and IECEx approvals, suitable for hazardous area installations. Contact AutoDCSTech for availability and lifecycle status before ordering.
Please verify current lifecycle status and availability with AutoDCSTech before ordering.
Availability & Condition at AutoDCSTech
| Part Number | 330102-00-43-05-02-05 |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
