Bently Nevada 330103-00-06-10-12-00 3300 XL 8 mm Proximity Probe

Technical Specifications Breakdown

Key parameters for the 330103-00-06-10-12-00 are listed below for quick reference:

Industry Applications

Its robust design withstands high temperatures up to +177°C standard (or +218°C tip / +260°C cable with extended range option) and operates reliably in humid environments (less than 3% ASF change at 93% humidity per IEC 68-2-3). The 2 mm linear range provides the resolution needed for early fault detection.

Installation & Setup Guidance

For best results, mount the probe with the recommended gap setting of -9 Vdc (approximately 1.27 mm or 50 mils) from the target. Use field wiring of 0.2 to 1.5 mm² (16 to 24 AWG) with a three-conductor shielded triad cable. The maximum cable length between the 3300 XL Proximitor Sensor and the monitor is 305 meters (1,000 feet). Ensure the probe case thread engagement does not exceed 15 mm to avoid mechanical interference.

Maintenance & Reliability

Periodically inspect the probe cable and connector for signs of wear or damage. Avoid exposing the probe to temperatures below -34°C (-30°F) as this may cause premature failure of the pressure seal. The probe is designed to seal differential pressure between tip and case using a Viton® O-ring; however, it is not pressure tested before shipment. Contact Bently Nevada if pressure seal testing is required for your application.

Reliable Vibration Monitoring with the 3300 XL 8 mm Proximity Probe

When protecting critical rotating machinery, accurate and repeatable vibration measurements are non-negotiable. The Bently Nevada 330103-00-06-10-12-00 is a 3300 XL 8 mm proximity probe engineered for demanding industrial environments. This component provides precise displacement readings, helping you detect shaft vibration and position changes before they lead to costly downtime.

The 330103-00-06-10-12-00 features a polyphenylene sulfide (PPS) probe tip and an AISI 303 or 304 stainless steel case, offering chemical resistance and mechanical durability. The 1.0 meter (3.3 feet) total length includes a miniature coaxial ClickLoc connector and FluidLoc cable, ensuring a secure, reliable connection in harsh conditions.

Compatibility & Integration

The 330103-00-06-10-12-00 works with the 3300 XL Proximitor Sensor and compatible monitoring systems. When installed with intrinsically safe zener barriers per drawing 141092 or galvanic isolators, it meets Class I, Zone 0: AEx/Ex ia IIC T5...T1 Ga; Class 1, Groups A, B, C, D; Class II, Groups E, F, G; Class III. For non-incendive installations per drawing 140979, it meets Class I, Zone 2: AEx/Ex nA IIC T5…T1 Gc; Class 1, Division 2, Groups A, B, C, D; and Class I, Zone 2: AEx/Ex ec IIC T5…T1 Gc.

Selection Guide & Purchasing Advice

When selecting a replacement or spare probe, verify the part number 330103-00-06-10-12-00 matches your existing configuration: M10 x 1 thread, 0 mm unthreaded length, 60 mm case, 1.0 m cable, ClickLoc connector. AutoDCSTech stocks genuine Bently Nevada components to ensure reliable operation. Please verify current lifecycle status and availability with AutoDCSTech before ordering.