FANUC A06B-6087-H115 Power Supply for CNC Servo Conversion

Key Technical Specifications

The FANUC A06B-6087-H115 operates on a 3-phase input at 50/60 Hz, making it adaptable to global electrical standards. It provides output voltages of 200-230 V AC/DC, ensuring consistent power to servo drives. The unit is air-cooled and designed for vertical or wall-mounted installation, fitting into standard control cabinets. Protection features include overload, overcurrent, and overvoltage safeguards, reducing the risk of damage from electrical faults.

Industry Applications

In a typical retrofit scenario, replacing an older power supply with the A06B-6087-H115 improves system reliability and reduces unplanned downtime. Its wide operating temperature range of 0°C to 55°C suits both climate-controlled and factory floor environments.

Installation and Setup Guidance

Mount the A06B-6087-H115 vertically on a flat surface using the provided brackets. Ensure adequate airflow around the air-cooled unit and avoid blocking ventilation slots. Connect the 3-phase input wiring according to local electrical codes, verifying voltage and phase rotation before power-up. The unit's overload and overvoltage protection activate automatically, simplifying commissioning.

Maintenance and Reliability

Regular inspection of cooling fans and air filters keeps the A06B-6087-H115 operating at peak efficiency. Check for dust accumulation every three months and clean with compressed air if needed. The unit's >95% efficiency reduces heat generation, extending the life of internal components. Overload and overcurrent protection features prevent damage from abnormal loads, lowering total cost of ownership.

Reliable Power Conversion for CNC Systems

When servo power conversion in CNC systems faces instability or downtime, the FANUC A06B-6087-H115 power supply provides a robust solution. This servo power converter handles input voltages from 200 to 230 V AC or DC and delivers a rated current of 63 A. With over 95% efficiency, it minimizes energy loss and supports continuous operation in demanding industrial environments.

Selection Guide and Purchasing Advice

Before purchasing the FANUC A06B-6087-H115, verify that your CNC system requires a 200-230 V, 63 A servo power converter with 3-phase input. Confirm physical dimensions and mounting orientation to ensure fit within your cabinet. AutoDCSTech stocks this model and can advise on compatibility with your existing FANUC servo drives and controllers.