Technical Specifications Breakdown
Key parameters for the 330103-00-11-10-02-00 are listed below for quick reference:
| Feature | Specification |
|---|---|
| Probe Type | 3300 XL 8 mm Proximity Probe, Metric |
| Thread Size | M10 x 1 |
| Unthreaded Length | 00 mm |
| Overall Case Length | 110 mm |
| Total Length | 1.0 meter (3.3 feet) |
| Connector Type | Miniature coaxial ClickLoc connector |
| Cable Type | Standard cable |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Probe DC Resistance (1.0m) | 7.59 ± 0.50 Ω |
| Linear Range | 2 mm (80 mils) |
| Recommended Gap Setting (Radial Vibration) | -9 Vdc [approx. 1.27 mm (50 mils)] |
| Operating Temperature (Standard) | -52°C to +177°C (-62°F to +350°F) |
| Extended Temperature (Tip) | -52°C to +218°C (-62°F to +425°F) |
| Extended Temperature (Cable) | -51°C to +260°C (-60°F to +500°F) |
| Humidity Effect | <3% change in ASF at 93% RH per IEC 68-2-3 |
Industry Applications
The M10 x 1 thread allows direct mounting in metric bearing housings, reducing installation complexity. For high-temperature environments, the extended temperature range option (up to 218°C tip) ensures reliable data in steam turbines and gas compressors.
Installation & Setup Guidance
When installing the 330103-00-11-10-02-00, ensure the probe tip is clean and the target surface is smooth. The maximum thread engagement is 15 mm. Use 0.2 to 1.5 mm² (16 to 24 AWG) field wiring with a three-conductor shielded triad cable. The maximum field wiring length between the Proximitor Sensor and monitor is 305 meters (1,000 feet). For extended cable runs, refer to the frequency response graphs to avoid signal roll-off at high frequencies. The probe is designed to seal differential pressure between tip and case using a Viton O-ring; it is not pressure tested before shipment.
Maintenance & Reliability
Inspect the probe cable and connector periodically for damage. Avoid exposing the probe to temperatures below -34°C (-30°F) to prevent premature pressure seal failure. The PPS tip resists chemical attack, and the stainless steel case provides corrosion resistance. The probe exhibits less than 3% change in Average Scale Factor (ASF) when tested at 93% humidity per IEC 68-2-3 for up to 56 days, ensuring stable performance in humid environments.
Compatibility & Integration
The 330103-00-11-10-02-00 is part of the 3300 XL series and is compatible with Bently Nevada Proximitor Sensors and monitoring systems. For intrinsically safe installations, it can be used with zener barriers per drawing 141092 or galvanic isolators, achieving Class I, Zone 0 ratings (AEx/Ex ia IIC T5...T1 Ga). For non-incendive circuits per drawing 140979, it meets Class I, Zone 2 ratings (AEx/Ex nA IIC T5…T1 Gc). Always follow the approved connection drawings for hazardous area compliance.
Selection Guide & Purchasing Advice
When selecting a proximity probe, consider the required cable length, connector type, and environmental conditions. The 330103-00-11-10-02-00 with its 1.0 meter cable and miniature coaxial ClickLoc connector suits most standard installations. For longer cable runs or armored versions, consult the 3300 XL series options. AutoDCSTech stocks this exact model and can advise on compatible accessories. Please verify current lifecycle status and availability with AutoDCSTech before ordering.
Availability & Condition at AutoDCSTech
| Part Number | 330103-00-11-10-02-00 |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
