Bently Nevada 31000-16-10-15-041-03-02 Proximity Probe Housing

Technical Specifications Breakdown

Key parameters for the 31000-16-10-15-041-03-02 are listed below for quick reference:

Industry Applications for the 31000 Proximity Probe Housing

The Type 4X and IP66 ratings ensure reliable operation in washdown environments and outdoor installations. The BASEEFA-certified impact strength (4 J at -39°C and 115°C) makes it suitable for hazardous areas where mechanical integrity is critical.

Installation & Setup Guidance

Mount the housing using the 3/4-14 NPT thread (option 02). The included fittings package contains two plugs, one 3/4-14 NPT fitting, one 3/4-14 to 1/2-14 NPT SST reducer, and a cable seal grip with grommets for cable sizes from 1/8 to 3/8 inches. Tighten the retaining nut to 29.4 N·m (260 in·lb) as recommended. Ensure the grounding liner is properly installed to maintain electrostatic dissipation per CENELEC EN50014.

Maintenance & Reliability

Inspect the housing and O-ring (Neoprene) periodically for signs of wear or chemical attack. The AISI 304 stainless steel sleeve and retaining chain, along with AISI 303 outer sleeve and screws, resist corrosion in harsh environments. Verify the cable seal grip remains tight to maintain IP66 integrity.

Compatibility & Integration

This housing is designed specifically for Bently Nevada 3300 XL 8 mm proximity probes. The 1.0 m (39 in) probe cable length and 4.1 in penetration option suit standard bearing housing installations. The standoff adapter (minimum 1.5 in) allows proper probe positioning.

Selection Guide & Purchasing Advice

When ordering the 31000-16-10-15-041-03-02, verify that the mounting thread (3/4-14 NPT) matches your installation. Please verify current lifecycle status and availability with AutoDCSTech before ordering.