330101-00-16-10-02-00: A 1.6 in Case for Shallow Holders
The 1.6 in overall case is the short-case end of the 330101 range, and it is the right variant where the probe holder is a shallow design. In a deep holder an over-length probe bottoms out before the tip reaches the target surface, so case length here is a fit decision rather than a preference.
Decoded against the published configuration data: 330101 = 3300 XL 8 mm probe platform, 3/8-24 UNF thread, without armor. 00 = unthreaded length option 0.0 in. 16 = overall case length option 1.6 in. 10 = total length 1.0 metre (3.3 feet). 02 = miniature coaxial ClickLoc connector, standard cable. 00 = approval code 00.
| Feature | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Brand | Bently Nevada |
| Part Number | 330101-00-16-10-02-00 |
| Unthreaded Length Option | 00 - 0.0 in |
| Overall Case Length Option | 16 - 1.6 in |
| Total Length Option | 10 - 1.0 metre (3.3 feet) |
| Connector and Cable-Type Option | 02 Miniature coaxial ClickLoc connector, standard cable |
Case Length Options in the 330101 Range
| 3301xx Part Number | Case Length / Total Length |
|---|---|
| 330101-00-08-05-02-00 | 3300 XL 8 mm probe — compare case length against the holder before ordering |
| 330101-00-08-05-02-05 | 3300 XL 8 mm probe — compare case length against the holder before ordering |
| 330101-00-08-05-12-CN | 3300 XL 8 mm probe — compare case length against the holder before ordering |
| 330101-00-08-10-01-CN | 3300 XL 8 mm probe — compare case length against the holder before ordering |
| 330101-00-08-10-02-00 | 3300 XL 8 mm probe — compare case length against the holder before ordering |
| 330101-00-08-10-02-05 | 3300 XL 8 mm probe — compare case length against the holder before ordering |
| 330101-00-08-10-02-CN | 3300 XL 8 mm probe — compare case length against the holder before ordering |
| 330101-00-08-10-11-00 | 3300 XL 8 mm probe — compare case length against the holder before ordering |
| 330101-00-08-10-11-CN | 3300 XL 8 mm probe — compare case length against the holder before ordering |
| 330101-00-08-20-02-05 | 3300 XL 8 mm probe — compare case length against the holder before ordering |
| 330101-00-08-20-02-CN | 3300 XL 8 mm probe — compare case length against the holder before ordering |
| 330101-00-08-20-12-00 | 3300 XL 8 mm probe — compare case length against the holder before ordering |
All Bently Nevada parts · Sensors & Instrumentation
Short Case, Long Cable: The Common Mismatch
This variant pairs a short case with a 1.0 m cable, which is a combination that gets misread. The short case and the cable length are independent dimensions — the case determines mounting reach, the cable determines routing distance. A machine needing a short case but a longer cable route is not served by stretching this one; it is served by a different total-length option in the same family.
Gap and Connector
Recommended gap on this platform is -9 Vdc, approximately 1.27 mm (50 mils) for radial vibration monitoring. The ClickLoc connector locks by rotation and does not require a torque wrench. The probe seals differential pressure between tip and case with a Viton O-ring and is not field-repairable — a suspect seal means a replacement probe, not a disassembly.
Supply & terms: Stock status: In Stock · Condition: New · Warranty: One Year · Origin: US. Listed by AutoDCS Tech Parts Team · Last updated .
Availability & Condition at AutoDCSTech
| Part Number | 330101-00-16-10-02-00 |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
