Bently Nevada 330101-00-24-10-02-00 3300 XL 8 mm Probe

330101-00-24-10-02-00: A 2.4 in Case, General Purpose Configuration

The 2.4 in case places this variant in the middle of the 330101 range, which is why it appears so often as a replacement: it suits the majority of standard probe holders where neither a very short nor a very long case is required. When the removed probe carries this case length, the replacement is mechanical rather than engineering.

Decoded against the published configuration data: 330101 = 3300 XL 8 mm probe, 3/8-24 UNF thread, without armor. 00 = unthreaded length 0.0 in. 24 = overall case length 2.4 in. 10 = total length 1.0 metre (3.3 feet). 02 = miniature coaxial ClickLoc connector.

Case Length Across the 3301xx Range

All Bently Nevada parts · Sensors & Instrumentation

Why the Middle Case Length Is the Common Replacement

A mid-length case is what most probe holders are built around, which makes this the variant most often needed as a like-for-like replacement. The practical point for a maintenance order is that a mid-case probe can usually be substituted without a holder change, whereas moving to a short or long case is a decision that may require modifying the mount.

What the Tip and Case Materials Buy

Probe tip is polyphenylene sulfide (PPS) and case is AISI 303 or 304 stainless steel. The PPS tip resists wear in high-speed applications where a softer tip would erode, and the stainless case tolerates the temperature profiles typical of turbine and compressor casings. Linear range is 2 mm (80 mils), which captures shaft motion across start-up and coast-down.

Supply & terms: Stock status: In Stock · Condition: New · Warranty: One Year · Origin: US. Listed by AutoDCS Tech Parts Team · Last updated 2026-10-07.

Bently Nevada brand hub