Bently Nevada 330101-00-27-15-02-00 3300 XL 8 mm Probe, 3/8-24 UNF Thread

330101-00-27-15-02-00: A 1.5 m Cable Variant for Distant Junction Boxes

The Bently Nevada 330101-00-27-15-02-00 is a 3300 XL 8 mm probe with 3/8-24 UNF thread, 1.5 meter cable, and miniature coaxial ClickLoc connector. It features a PPS tip, stainless steel case, and 2 mm linear range. Ideal for vibration monitoring.

The distinguishing specification on this variant is the 1.5 metre cable — longer than the 1.0 metre that most of the 330101 range carries. That makes it the correct pick where the probe is mounted away from its junction box and a standard-length cable would leave the run short.

The 27 position in the case-length segment gives a 2.7 in overall case, and the miniature coaxial ClickLoc connector at the probe end is the standard 330101 termination. Thread is 3/8-24 UNF and the probe is supplied without armor.

Total Length Options in the 3301xx Range

Total length is the dimension that decides whether the existing cable route is reachable. These are the comparable configurations:

All Bently Nevada parts · Sensors & Instrumentation

Specifying Cable Length as a Route Measurement

The practical discipline with total length is to measure the actual route rather than estimate it. A 1.5 m variant covers a longer run than a 1.0 m one, but the correct choice depends on the distance from probe to junction box plus the service loop needed at both ends. Where the measured route sits between catalogue lengths, the longer variant with a managed service loop is usually the more workable choice.

What to Verify Before Ordering

Confirm thread (3/8-24 UNF), case length (2.7 in) and total length (1.5 m) against the probe being removed. A probe that matches on two of the three will install but may not route correctly, so all three need to agree.

Supply & terms: Stock status: In Stock · Condition: New · Warranty: One Year · Origin: US. Listed by AutoDCS Tech Parts Team · Last updated 2026-10-07.

Bently Nevada brand hub