Bently Nevada 330102-00-12-90-02-05 3300 XL 8 mm Proximity Probe

Technical Specifications Breakdown

Key parameters for the 330102-00-12-90-02-05 are listed below for quick reference:

Industry Applications

The 9.0 meter cable length allows flexible routing from the machine case to the Proximitor sensor, simplifying installation in crowded machinery trains. With ATEX and IECEx approvals, it is suitable for use in hazardous areas such as refineries and chemical plants.

Installation & Setup Guidance

Mount the probe using the 3/8-24 UNF thread into a drilled and tapped hole per manufacturer guidelines. Ensure the probe tip is gapped at 1.27 mm (50 mils) relative to an AISI 4140 steel target for optimal linear range. The Viton O-ring seals differential pressure between tip and case, so verify the O-ring is undamaged before installation. Use only the specified 9 meter Proximitor sensor for this probe length.

Maintenance & Reliability

Periodically inspect the probe cable and connector for signs of wear or corrosion. The PPS tip resists many chemicals, but avoid direct contact with aggressive solvents. In high-temperature applications, refer to the temperature schedule to ensure the probe ambient stays within limits for the required temperature class.

Precision Vibration Monitoring for Critical Machinery

When uptime and safety are non-negotiable, the Bently Nevada 330102-00-12-90-02-05 3300 XL 8 mm Proximity Probe delivers the accuracy and durability required for continuous protection of rotating assets. This probe is engineered for permanent installation in harsh industrial environments, providing reliable measurement of shaft vibration and position.

Compatibility & Integration

This probe is designed exclusively for use with 3300 XL 8 mm Proximitor sensors and extension cables. It accepts a -17.5 Vdc to -26 Vdc power supply and provides a 50 Ω output resistance. The system accuracy is specified with an AISI 4140 steel target; using other targets will affect calibration.

Selection Guide & Purchasing Advice

For critical spares or new installations, the 330102-00-12-90-02-05 offers a proven solution with global approvals. Contact AutoDCSTech to verify current lifecycle status and availability before ordering. Our team can help match this probe to your existing Bently Nevada monitoring system.