Technical Specifications Breakdown
Key parameters for the 330102-00-44-10-11-05 are listed below for quick reference:
| Feature | Specification |
|---|---|
| Product Type | 3300 XL 8 mm Proximity Probe |
| Thread Size | 3/8-24 UNF |
| Unthreaded Length | 00 in |
| Overall Case Length | 4.4 in |
| Total Length | 1.0 meter (3.3 feet) |
| Connector | Miniature coaxial ClickLoc with connector protector, FluidLoc cable |
| Agency Approvals | CSA, ATEX, IECEx |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Linear Range | 2 mm (80 mils), from 0.25 to 2.3 mm (10 to 90 mils) |
| Recommended Gap Setting (Radial Vibration) | -9 Vdc [approximately 1.27 mm (50 mils)] |
| Probe DC Resistance (1.0 m length) | 7.59 ± 0.50 Ω |
| Probe Temperature Range (Standard) | -52°C to +177°C (-62°F to +350°F) |
| Probe Weight | 323 g/m (11.4 oz) |
Industry Applications
The PPS tip and stainless steel case withstand high temperatures and corrosive atmospheres, while the armored thread resists mechanical damage during installation. With CSA, ATEX, and IECEx approvals, it is suitable for hazardous areas in oil and gas, petrochemical, and power generation facilities.
Installation & Setup Guidance
For optimal performance, mount the probe with the recommended gap setting of -9 Vdc (approximately 1.27 mm or 50 mils) from the target surface. Use field wiring of 0.2 to 1.5 mm² (16 to 24 AWG) with a three-conductor shielded triad cable. Maximum cable length between the 3300 XL Proximitor Sensor and the monitor is 305 meters (1,000 feet). Ensure the probe tip does not contact the rotating shaft during operation.
Maintenance & Reliability
Inspect the probe and cable periodically for physical damage, especially near the connector and tip. Avoid exposing the probe to temperatures below -34°C (-30°F) as this may cause premature failure of the pressure seal. The probe is designed to seal differential pressure between tip and case using a Viton O-ring. If pressure seal integrity is critical, contact the custom design department for testing.
Reliable Vibration Monitoring for Critical Machinery
When protecting rotating assets like turbines, compressors, and pumps, accurate shaft vibration measurement is non-negotiable. The Bently Nevada 330102-00-44-10-11-05 is a 3300 XL 8 mm proximity probe engineered for harsh industrial environments. Its robust design and certified safety approvals make it a trusted choice for continuous monitoring applications.
Compatibility & Integration
This probe is part of the Bently Nevada 3300 XL series and is compatible with 3300 XL Proximitor Sensors and monitoring systems. The miniature coaxial ClickLoc connector with connector protector and FluidLoc cable ensures reliable signal transmission in wet or oily environments.
Selection Guide & Purchasing Advice
When selecting a replacement or new probe, verify the thread size (3/8-24 UNF), overall case length (4.4 in), and total length (1.0 m) match your application. The 330102-00-44-10-11-05 is available from AutoDCSTech. Please verify current lifecycle status and availability with AutoDCSTech before ordering.
Availability & Condition at AutoDCSTech
| Part Number | 330102-00-44-10-11-05 |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
