Technical Specifications Breakdown
Key parameters for the 330102-00-60-05-02-05 are listed below for quick reference:
| Feature | Specification |
|---|---|
| Product Type | 3300 XL 8 mm Proximity Probe |
| Unthreaded Length Option | 00 = 0 in |
| Overall Case Length Option | 60 = 6 in |
| Total Length Option | 05 = 0.5 meter (1.6 feet) |
| Connector and Cable-Type Option | 02 Miniature coaxial ClickLoc connector, standard cable |
| Agency Approval Option | 05 CSA, ATEX, IECEx Approvals |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Probe Case Thread | 3/8-24 UNF |
| Linear Range | 2 mm (80 mils) |
| Recommended Gap Setting for Radial Vibration | -9 Vdc [approximately 1.27 mm (50 mils)] |
| Probe Temperature Range (Standard) | -52°C to +177°C (-62°F to +350°F) |
| Probe Relative Humidity | Less than a 3% change in ASF when tested in 93% humidity per IEC 68 2 3 for up to 56 days |
| Field Wiring | 0.2 to 1.5 mm² (16 to 24 AWG), 3 conductor shielded triad, max 305 m (1,000 ft) |
Industry Applications
The 2 mm linear range and -9 Vdc recommended gap setting ensure accurate data for predictive maintenance programs. By catching early signs of shaft instability, operators reduce unplanned outages and extend machinery life.
Installation & Setup Guidance
Mount the probe using the 3/8-24 UNF thread with a maximum thread engagement of 0.563 in. Use 3-conductor shielded triad cable (16 to 24 AWG) for field wiring, keeping total length under 305 meters to avoid signal roll-off. The miniature coaxial ClickLoc connector simplifies secure attachment. Always verify the gap voltage at -9 Vdc during commissioning.
Maintenance & Reliability
Inspect the probe and cable periodically for physical damage or contamination. Avoid exposing the probe to temperatures below -34°C (-30°F) to prevent premature pressure seal failure. The PPS tip and stainless steel case resist corrosion in humid or chemically aggressive environments.
Precision Vibration Monitoring with the Bently Nevada 330102-00-60-05-02-05
In rotating machinery, undetected shaft vibration leads to costly downtime and catastrophic failures. The Bently Nevada 330102-00-60-05-02-05 3300 XL 8 mm Proximity Probe delivers the accuracy and reliability needed for continuous protection. This component is engineered for harsh industrial environments, providing non-contact displacement measurement for turbines, compressors, and pumps.
Compatibility & Integration
This 0.5-meter probe is designed for use with the 5 meter Proximitor sensor only. It integrates with Bently Nevada monitoring systems and supports intrinsically safe installations when used with approved zener barriers or galvanic isolators per drawing 141092.
Selection Guide & Purchasing Advice
When selecting a replacement, verify total length, thread type, and agency approvals match your application. The 330102-00-60-05-02-05 is available at AutoDCSTech, a trusted supplier of industrial automation parts. Please verify current lifecycle status and availability with AutoDCSTech before ordering.
Availability & Condition at AutoDCSTech
| Part Number | 330102-00-60-05-02-05 |
|---|---|
| Availability | In Stock |
| Condition | New |
| Warranty | One Year |
| Origin | US |
